lkml.org 
[lkml]   [2015]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] spi-nor: Add SFDP detect method
Date
The following are the details of patch:
- Add read/write scurity register functions to support some commands.
- Add suspend/resume commands.
- Add sfdp option to Kconfig and *_detect_sfdp function to support
some specific commands. I also rearranged the setting steps in
func spi_nor_scan to fit the sfdp method.
- The sfdp related functions have tested with Macronix chips, so I
also add some commands for Macronix. Such as protection region
(security OTP) and three types of islocked/lock/unlcok functions.
- Add some definitions and data structures to spi-nor.h to support
above modifications.
Thanks!

Signed-off-by: Jim Kuo <jimtingkuo@gmail.com>
---
drivers/mtd/spi-nor/Kconfig | 11 +
drivers/mtd/spi-nor/spi-nor.c | 730 +++++++++++++++++++++++++++++++++++++++---
include/linux/mtd/spi-nor.h | 201 ++++++++++++
3 files changed, 899 insertions(+), 43 deletions(-)

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 64a4f0e..f40548b 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -21,6 +21,17 @@ config MTD_SPI_NOR_USE_4K_SECTORS
Please note that some tools/drivers/filesystems may not work with
4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).

+config MTD_SPI_NOR_SFDP
+ bool "Serial Flash Discoverable Parameters (SFDP) Probe"
+ default n
+ help
+ SFDP includes the most detailed information of SPI NOR flash memory.
+ It can be used to detect flash and get devices' parameters.
+
+ Attention that there are many flash flags can not covered by SFDP such
+ as SST_WRITE, USE_FSR, SPI_NOR_NO_FR and SECT_4K_PMC. Please do not
+ enable this option if your device is highly related with these flags.
+
config SPI_FSL_QUADSPI
tristate "Freescale Quad SPI controller"
depends on ARCH_MXC
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index a6c7337..2340ead 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -119,6 +119,25 @@ static int read_cr(struct spi_nor *nor)
}

/*
+ * Read the security register, returning its value in the location
+ * Return the security register value.
+ * Returns negative if error occurred.
+ */
+static int read_scur(struct spi_nor *nor)
+{
+ int ret;
+ u8 val;
+
+ ret = nor->read_reg(nor, SPINOR_OP_RDSCUR, &val, 1);
+ if (ret < 0) {
+ pr_err("error %d reading SCUR\n", (int) ret);
+ return ret;
+ }
+
+ return val;
+}
+
+/*
* Dummy Cycle calculation for different type of read.
* It can be used to support more commands with
* different dummy cycle requirements.
@@ -147,6 +166,15 @@ static inline int write_sr(struct spi_nor *nor, u8 val)
}

/*
+ * Set LDSO bit with Write Security Register command.
+ * Returns negative if error occurred.
+ */
+static inline int write_scur(struct spi_nor *nor)
+{
+ return nor->write_reg(nor, SPINOR_OP_WRSCUR, NULL, 0, 0);
+}
+
+/*
* Set write enable latch with Write Enable command.
* Returns negative if error occurred.
*/
@@ -802,19 +830,12 @@ time_out:
* FLASH_PAGESIZE chunks. The address range may be any size provided
* it is within the physical boundaries.
*/
-static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+static int spi_nor_do_write(struct spi_nor *nor, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
u32 page_offset, page_size, i;
int ret;

- dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
-
- ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
- if (ret)
- return ret;
-
write_enable(nor);

page_offset = to & (nor->page_size - 1);
@@ -835,7 +856,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,

ret = spi_nor_wait_till_ready(nor);
if (ret)
- goto write_err;
+ return ret;

write_enable(nor);

@@ -843,12 +864,416 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
}
}

- ret = spi_nor_wait_till_ready(nor);
-write_err:
+ return 0;
+}
+
+static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ int ret;
+
+ dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+ ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_do_write(nor, to, len, retlen, buf);
+ if (!ret)
+ ret = spi_nor_wait_till_ready(nor);
+
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
return ret;
}

+/*
+ * Power suspend and resume.
+ */
+static int spi_nor_suspend(struct mtd_info *mtd)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+
+ return nor->write_reg(nor, SPINOR_OP_DP, NULL, 0, 0);
+}
+
+static void spi_nor_resume(struct mtd_info *mtd)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+
+ nor->write_reg(nor, SPINOR_OP_RDP, NULL, 0, 0);
+}
+
+/*
+ * Read/Write manufacture or user protection area (One Time Program).
+ * Enter security OTP mode before access, and exit after access.
+ * The OTP area can be locked to prevent any modification, and there
+ * is no way to unlock it.
+ */
+static int macronix_otp(struct mtd_info *mtd, loff_t addr, size_t len,
+ size_t *retlen, u_char *buf, enum spi_nor_ops ops)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ int ret;
+
+ ret = spi_nor_lock_and_prep(nor, ops);
+ if (ret)
+ return ret;
+
+ /* enter security OTP */
+ ret = nor->write_reg(nor, SPINOR_OP_ENSO, NULL, 0, 0);
+ if (ret) {
+ spi_nor_unlock_and_unprep(nor, ops);
+ return ret;
+ }
+
+ if (ops == SPI_NOR_OPS_READ)
+ nor->read(nor, addr, len, retlen, buf);
+
+ else { /* ops == SPI_NOR_OPS_WRITE */
+
+ /* exit if OTP has been locked */
+ if (read_scur(nor) & 0x03) {
+ spi_nor_unlock_and_unprep(nor, ops);
+ return 0;
+ }
+ spi_nor_do_write(nor, addr, len, retlen, buf);
+ }
+
+ /* eixt security OTP */
+ nor->write_reg(nor, SPINOR_OP_EXSO, NULL, 0, 0);
+
+ spi_nor_unlock_and_unprep(nor, ops);
+ return 0;
+}
+
+static int macronix_get_fact_prot_info(struct mtd_info *mtd,
+ size_t len, size_t *retlen, struct otp_info *buf)
+{
+ /*
+ * Factor area stores electronical serial number (ESN).
+ * And the area can not be modified.
+ */
+ buf->start = 0;
+ buf->length = 0x10;
+ buf->locked = 1;
+ return 0;
+}
+
+static int macronix_read_fact_prot_reg(struct mtd_info *mtd,
+ loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+ if (from < 0 || from + len > 0x10)
+ return -EINVAL;
+ return macronix_otp(mtd, from, len, retlen, buf,
+ SPI_NOR_OPS_READ);
+}
+
+static int macronix_get_user_prot_info(struct mtd_info *mtd,
+ size_t len, size_t *retlen, struct otp_info *buf)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+
+ buf->start = 0x10;
+ if (mtd->size > 0x800000) {
+ /* The OTP size are 0x200 if the device exceeds 8MiB. */
+ buf->length = 0x1f0;
+ } else {
+ buf->length = 0x30;
+ }
+ buf->locked = (read_scur(nor) & 0x03) ? 1 : 0;
+ return 0;
+}
+
+static int macronix_read_user_prot_reg(struct mtd_info *mtd,
+ loff_t from, size_t len, size_t *retlen, u_char *buf)
+{
+ /*
+ * Macronix user and factor security area are the same.
+ * If the device is larger than 8 Mbyte, it only support
+ * factor area.
+ */
+ if (from < 0x10 || from + len > 0x40 ||
+ (mtd->size > 0x800000 && from + len > 0x200)) {
+ return -EINVAL;
+ }
+ return macronix_otp(mtd, from, len, retlen, buf,
+ SPI_NOR_OPS_READ);
+}
+
+static int macronix_write_user_prot_reg(struct mtd_info *mtd,
+ loff_t to, size_t len, size_t *retlen, u_char *buf)
+{
+ if (to < 0x10 || to + len > 0x40 ||
+ (mtd->size > 0x800000 && to + len > 0x200)) {
+ return -EINVAL;
+ }
+ return macronix_otp(mtd, to, len, retlen, buf,
+ SPI_NOR_OPS_WRITE);
+}
+
+/*
+ * Write LDSO bit (Lock-Down Security OTP) to 1.
+ */
+static int macronix_lock_user_prot_reg(struct mtd_info *mtd,
+ loff_t from, size_t len)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+
+ if (len == 0)
+ return 0;
+
+ write_enable(nor);
+
+ return write_scur(nor);
+}
+
+/*
+ * Write protect selection command should be done before block lock.
+ */
+static int macronix_wpsel(struct spi_nor *nor)
+{
+ int retval;
+
+ /* read security register to check WPSEL status */
+ retval = read_scur(nor);
+ if (retval < 0)
+ return retval;
+ if ((u8)retval & 0x80)
+ return 0;
+
+ write_enable(nor);
+
+ return nor->write_reg(nor, SPINOR_OP_WPSEL, NULL, 0, 0);
+}
+
+static int macronix_gang_lock(struct mtd_info *mtd,
+ enum spi_nor_ops ops)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+
+ write_enable(nor);
+
+ if (ops == SPI_NOR_OPS_LOCK)
+ return nor->write_reg(nor, SPINOR_OP_GBLK, NULL, 0, 0);
+ else /* ops == SPI_NOR_OPS_UNLOCK */
+ return nor->write_reg(nor, SPINOR_OP_GBULK, NULL, 0, 0);
+}
+
+static int macronix_read_lock_status(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len, enum macronix_lock_type type)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ struct spi_nor_xfer_cfg cfg;
+ uint64_t end;
+ u32 move;
+ u8 status;
+ int ret;
+
+ /* do write protect selection first */
+ ret = macronix_wpsel(nor);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_READ);
+ if (ret)
+ return ret;
+
+ if (type == MX_SBLK) {
+ cfg.cmd = SPINOR_OP_RDBLOCK;
+ cfg.addr_pins = nor->addr_width;
+ } else {
+ if (type == MX_SPB)
+ cfg.cmd = SPINOR_OP_RDSPB;
+ else /* type == MX_DPB */
+ cfg.cmd = SPINOR_OP_RDDPB;
+ cfg.addr_pins = 4;
+ }
+
+ cfg.cmd_pins = 1;
+ cfg.mode_pins = 0;
+ cfg.dummy_cycles = 0;
+
+ end = ofs + len - 1;
+
+ for (; ofs <= end && ofs < mtd->size; ofs += move) {
+ /* align the sector/blok size */
+ if (ofs < 0x10000 || ofs >= mtd->size - 0x10000)
+ move = 0x1000;
+ else
+ move = 0x10000;
+
+ cfg.addr = ofs;
+ nor->read_xfer(nor, &cfg, &status, 1);
+
+ /* status 0xff: protected, return 1 */
+ if (status == 0xff) {
+ spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
+ return 1;
+ }
+ }
+
+ spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
+ return 0;
+}
+
+/*
+ * Macronix individual block lock. There are many types of
+ * block protection used on different flash memory.
+ * Single lock: volatile lock for E-series chips.
+ * Solid protection bit: non-volatile.
+ * Dynamic protection: volatile.
+ */
+static int macronix_block_lock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len, enum macronix_lock_type type,
+ enum spi_nor_ops ops)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ struct spi_nor_xfer_cfg cfg;
+ uint64_t end;
+ u32 move;
+ u8 *val, valtmp;
+ size_t datalen;
+ int ret;
+
+ /* do write protect selection first */
+ ret = macronix_wpsel(nor);
+ if (ret)
+ return ret;
+
+ /* use gang command to do whole chip lock and unlock */
+ if (len == mtd->size && type != MX_SPB)
+ return macronix_gang_lock(mtd, ops);
+
+ ret = spi_nor_lock_and_prep(nor, ops);
+ if (ret)
+ return ret;
+
+ if (type == MX_DPB) {
+ cfg.cmd = SPINOR_OP_WRDPB;
+ cfg.addr_pins = 4;
+ valtmp = (ops == SPI_NOR_OPS_LOCK) ? 0xff : 0;
+ val = &valtmp;
+ datalen = 1;
+ } else {
+ if (type == MX_SBLK) {
+ cfg.cmd = (ops == SPI_NOR_OPS_LOCK) ?
+ SPINOR_OP_SBLK : SPINOR_OP_SBULK;
+ cfg.addr_pins = nor->addr_width;
+ } else { /* type == MX_SPB */
+ cfg.cmd = SPINOR_OP_WRSPB;
+ cfg.addr_pins = 4;
+ }
+ val = NULL;
+ datalen = 0;
+ }
+
+ cfg.cmd_pins = 1;
+ cfg.mode_pins = 0;
+ cfg.dummy_cycles = 0;
+ cfg.wren = 1;
+
+ /*
+ * The lock regions of Macronix are uniform. There use
+ * unit sector (4KB) in the first/last block, and unit
+ * block (64KB) in middle space of chips.
+ */
+
+ end = ofs + len - 1;
+
+ for (; ofs <= end && ofs < mtd->size; ofs += move) {
+ if (ofs < 0x10000 || ofs >= mtd->size - 0x10000)
+ move = 0x1000;
+ else
+ move = 0x10000;
+
+ cfg.addr = ofs;
+ nor->write_xfer(nor, &cfg, val, datalen);
+ }
+
+ spi_nor_unlock_and_unprep(nor, ops);
+ return 0;
+}
+
+/*
+ * Single block lock/unlock/islock command.
+ */
+static int macronix_single_lock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return macronix_block_lock(mtd, ofs, len, MX_SBLK,
+ SPI_NOR_OPS_LOCK);
+}
+
+static int macronix_single_unlock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return macronix_block_lock(mtd, ofs, len, MX_SBLK,
+ SPI_NOR_OPS_UNLOCK);
+}
+
+static int macronix_single_is_locked(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return macronix_read_lock_status(mtd, ofs, len, MX_SBLK);
+}
+
+/*
+ * Solid protection bit lock/unlock/islock command.
+ */
+static int macronix_solid_lock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return macronix_block_lock(mtd, ofs, len, MX_SPB,
+ SPI_NOR_OPS_LOCK);
+}
+
+static int macronix_solid_unlock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ int ret;
+
+ /* do write protect selection first */
+ ret = macronix_wpsel(nor);
+ if (ret)
+ return ret;
+
+ write_enable(nor);
+
+ /* erase solid bits will unlock all the blocks */
+ return nor->write_reg(nor, SPINOR_OP_ESSPB, NULL, 0, 0);
+}
+
+static int macronix_solid_is_locked(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return macronix_read_lock_status(mtd, ofs, len, MX_SPB);
+}
+
+/*
+ * Dynamic protection bit lock/unlock/islock command.
+ */
+static int macronix_dynamic_lock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return macronix_block_lock(mtd, ofs, len, MX_DPB,
+ SPI_NOR_OPS_LOCK);
+}
+
+static int macronix_dynamic_unlock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return macronix_block_lock(mtd, ofs, len, MX_DPB,
+ SPI_NOR_OPS_UNLOCK);
+}
+
+static int macronix_dynamic_is_locked(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return macronix_read_lock_status(mtd, ofs, len, MX_DPB);
+}
+
static int macronix_quad_enable(struct spi_nor *nor)
{
int ret, val;
@@ -931,6 +1356,202 @@ static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
}
}

+/*
+ * Read SFDP ia an fundamental but important command for doing
+ * flash scan and probe.
+ */
+static int sfdp_read(struct spi_nor *nor, loff_t from, size_t len,
+ void *buf)
+{
+ struct spi_nor_xfer_cfg cfg;
+
+ cfg.cmd = SPINOR_OP_RDSFDP;
+ cfg.cmd_pins = 1;
+ cfg.addr = from;
+ cfg.addr_pins = 3;
+ cfg.mode_pins = 0;
+ cfg.dummy_cycles = 8;
+
+ return nor->read_xfer(nor, &cfg, (u8 *)buf, len);
+}
+
+/*
+ * Setup Macronix device with sfdp parameters.
+ */
+static void macronix_detect_sfdp(struct spi_nor *nor,
+ struct sfdp_param_header *facthdr)
+{
+ struct sfdp_macronix_params mxchip;
+ struct mtd_info *mtd = nor->mtd;
+ u32 ptr, len;
+
+ /* get macronix parameters */
+ ptr = facthdr->pointer[0] + (facthdr->pointer[1] << 8) +
+ (facthdr->pointer[2] << 16);
+ len = (facthdr->length * 4/*DWORDs*/ < sizeof(mxchip)) ?
+ (facthdr->length * 4) : sizeof(mxchip);
+ if (sfdp_read(nor, ptr, len, &mxchip))
+ return;
+
+ /* security OTP support */
+ if (mxchip.protection_param & 0x0800) {
+ mtd->_get_fact_prot_info = macronix_get_fact_prot_info;
+ mtd->_read_fact_prot_reg = macronix_read_fact_prot_reg;
+ mtd->_get_user_prot_info = macronix_get_user_prot_info;
+ mtd->_read_user_prot_reg = macronix_read_user_prot_reg;
+ mtd->_write_user_prot_reg = macronix_write_user_prot_reg;
+ mtd->_lock_user_prot_reg = macronix_lock_user_prot_reg;
+ }
+
+ /* individual block lock support */
+ if (mxchip.protection_param & 0x0001) {
+
+ switch ((mxchip.protection_param >> 2) & 0xff) {
+ case SPINOR_OP_SBLK:
+ mtd->_lock = macronix_single_lock;
+ mtd->_unlock = macronix_single_unlock;
+ mtd->_is_locked = macronix_single_is_locked;
+ break;
+ case SPINOR_OP_WRSPB:
+ mtd->_lock = macronix_solid_lock;
+ mtd->_unlock = macronix_solid_unlock;
+ mtd->_is_locked = macronix_solid_is_locked;
+ break;
+ case SPINOR_OP_WRDPB:
+ mtd->_lock = macronix_dynamic_lock;
+ mtd->_unlock = macronix_dynamic_unlock;
+ mtd->_is_locked = macronix_dynamic_is_locked;
+ break;
+ default:
+ pr_err("Can not find Macronix protection parameters.\n");
+ return;
+ }
+
+ if (!(mxchip.protection_param & 0x0400))
+ mtd->_unlock(mtd, 0, mtd->size);
+ }
+}
+
+/*
+ * Check if the SPI NOR is SFDP compliant, returns 1 if it is, 0 otherwise.
+ * Directly update mtd information.
+ */
+static int spi_nor_detect_sfdp(struct spi_nor *nor, enum read_mode mode)
+{
+ struct spi_nor_sfdp_params sfdp;
+ struct sfdp_jedec_params jedec;
+ struct sfdp_param_header *jedechdr = NULL, *facthdr = NULL;
+ struct mtd_info *mtd = nor->mtd;
+ struct flash_info info;
+ u32 ptr, len;
+ int i, sect;
+
+ /* get JEDEC parameters */
+ sfdp_read(nor, 0, 4/*sizeof(sfdp.signature)*/, &sfdp.signature);
+ if (sfdp.signature != SFDP_SIGNATURE)
+ return 0;
+ if (sfdp_read(nor, 4, 4, &sfdp.minor_rev))
+ return 0;
+
+ if (sfdp.num_of_param_header < 1)
+ return 0;
+
+ if (sfdp_read(nor, 8,/*sizeof(sfdp.signature) + revision + header_num*/
+ sizeof(struct sfdp_param_header)*(sfdp.num_of_param_header+1),
+ sfdp.header)) {
+ return 0;
+ }
+
+ /*
+ * Get JEDEC and manufacture parameter header.
+ * Attention that num_of_param_header is zero base.
+ */
+ for (i = 0; i <= sfdp.num_of_param_header; i++) {
+ if (sfdp.header[i].id == 0)
+ jedechdr = &sfdp.header[i];
+ else if (sfdp.header[i].id != 0xFF)
+ facthdr = &sfdp.header[i];
+ if (jedechdr && facthdr)
+ break;
+ }
+ if (!jedechdr || !facthdr || jedechdr->major_rev == 0)
+ return 0;
+
+ /* read JEDEC parameters */
+ ptr = jedechdr->pointer[0] + (jedechdr->pointer[1] << 8) +
+ (jedechdr->pointer[2] << 16);
+ len = (jedechdr->length * 4/*DWORDs*/ < sizeof(jedec)) ?
+ jedechdr->length * 4 : sizeof(jedec);
+ if (sfdp_read(nor, ptr, len, &jedec))
+ return 0;
+
+ mtd->writesize = (jedec.f_param & 0x04) ? 64 : 1;
+ mtd->size = jedec.flash_density + 1;
+
+ /* max number of sector type = 4 */
+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+ for (sect = 0; sect < 4; sect++)
+ if (jedec.e_type[sect].size_power == 12)
+ break;
+ if (sect == 4)
+#endif
+ /* use largest sector as erase unit */
+ for (sect = 0, i = 1; i < 4; i++) {
+ if (jedec.e_type[i].size_power >
+ jedec.e_type[sect].size_power)
+ sect = i;
+ }
+
+ nor->erase_opcode = jedec.e_type[sect].opcode;
+ mtd->erasesize = (1 << jedec.e_type[sect].size_power);
+ if (nor->erase_opcode == 0xff)
+ mtd->flags |= MTD_NO_ERASE;
+
+ if (mode == SPI_NOR_QUAD && jedec.fr_support & 0x20) {
+ if (set_quad_mode(nor, &info))
+ return 0;
+ nor->flash_read = SPI_NOR_QUAD;
+ } else if (mode == SPI_NOR_DUAL && jedec.fr_support & 0x01) {
+ nor->flash_read = SPI_NOR_DUAL;
+ }
+
+ nor->addr_width = ((jedec.fr_support >> 1) & 0x03) ? 4 : 3;
+
+ /*
+ * Most of JEDEC 1.6 parameters are no use to mtd.
+ * They are reserved in the struct 'spi_nor_sfdp_params'
+ * for future usage.
+ */
+
+ if (jedechdr->major_rev > 1 || jedechdr->minor_rev >= 6) {
+ nor->page_size = 1 << ((jedec.p_param >> 4) & 0x0F);
+ mtd->writebufsize = nor->page_size;
+ }
+
+ dev_info(nor->dev, "sfdp %u.%u compliant, jedec rev %u.%u\n",
+ sfdp.major_rev, sfdp.minor_rev,
+ jedechdr->major_rev, jedechdr->minor_rev);
+
+ /*
+ * Get the manufacture defined parameters to mtd:
+ * protection area, lock, unlock and islock function.
+ */
+
+ switch (facthdr->id) {
+ case CFI_MFR_MACRONIX:
+ macronix_detect_sfdp(nor, facthdr);
+ break;
+
+ case CFI_MFR_ST:
+ /* nor protection support for STmicro chips */
+ mtd->_lock = spi_nor_lock;
+ mtd->_unlock = spi_nor_unlock;
+ break;
+ }
+
+ return 1;
+}
+
static int spi_nor_check(struct spi_nor *nor)
{
if (!nor->dev || !nor->read || !nor->write ||
@@ -1000,7 +1621,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)

if (JEDEC_MFR(info) == CFI_MFR_ATMEL ||
JEDEC_MFR(info) == CFI_MFR_INTEL ||
- JEDEC_MFR(info) == CFI_MFR_SST) {
+ JEDEC_MFR(info) == CFI_MFR_SST ||
+ JEDEC_MFR(info) == CFI_MFR_MACRONIX) {
write_enable(nor);
write_sr(nor, 0);
}
@@ -1008,17 +1630,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (!mtd->name)
mtd->name = dev_name(dev);
mtd->type = MTD_NORFLASH;
- mtd->writesize = 1;
mtd->flags = MTD_CAP_NORFLASH;
- mtd->size = info->sector_size * info->n_sectors;
mtd->_erase = spi_nor_erase;
mtd->_read = spi_nor_read;
-
- /* nor protection support for STmicro chips */
- if (JEDEC_MFR(info) == CFI_MFR_ST) {
- mtd->_lock = spi_nor_lock;
- mtd->_unlock = spi_nor_unlock;
- }
+ mtd->_suspend = spi_nor_suspend;
+ mtd->_resume = spi_nor_resume;

/* sst nor chips use AAI word program */
if (info->flags & SST_WRITE)
@@ -1029,21 +1645,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (info->flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;

-#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- /* prefer "small sector" erase if possible */
- if (info->flags & SECT_4K) {
- nor->erase_opcode = SPINOR_OP_BE_4K;
- mtd->erasesize = 4096;
- } else if (info->flags & SECT_4K_PMC) {
- nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
- mtd->erasesize = 4096;
- } else
-#endif
- {
- nor->erase_opcode = SPINOR_OP_SE;
- mtd->erasesize = info->sector_size;
- }
-
if (info->flags & SPI_NOR_NO_ERASE)
mtd->flags |= MTD_NO_ERASE;

@@ -1066,6 +1667,45 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (info->flags & SPI_NOR_NO_FR)
nor->flash_read = SPI_NOR_NORMAL;

+ /*
+ * We prepare to use SFDP to replace flash info struct, but
+ * there are many flags not covered by SFDP such as SST_WRITE,
+ * USE_FSR, SPI_NOR_NO_FR and SECT_4K_PMC. This part still need
+ * to be modified by each flash manufacturer. Finally, we hope
+ * we can setup spi-nor all from SFDP.
+ */
+
+#ifndef CONFIG_MTD_SPI_NOR_SFDP
+ if (0)
+#endif
+ /* If the chip is SFDP compliant, update the mtd info. */
+ if (spi_nor_detect_sfdp(nor, mode))
+ goto scan_done;
+
+ mtd->writesize = 1;
+ mtd->size = info->sector_size * info->n_sectors;
+
+ /* nor protection support for STmicro chips */
+ if (JEDEC_MFR(info) == CFI_MFR_ST) {
+ mtd->_lock = spi_nor_lock;
+ mtd->_unlock = spi_nor_unlock;
+ }
+
+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+ /* prefer "small sector" erase if possible */
+ if (info->flags & SECT_4K) {
+ nor->erase_opcode = SPINOR_OP_BE_4K;
+ mtd->erasesize = 4096;
+ } else if (info->flags & SECT_4K_PMC) {
+ nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
+ mtd->erasesize = 4096;
+ } else
+#endif
+ {
+ nor->erase_opcode = SPINOR_OP_SE;
+ mtd->erasesize = info->sector_size;
+ }
+
/* Quad/Dual-read mode takes precedence over fast/normal */
if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
ret = set_quad_mode(nor, info);
@@ -1078,6 +1718,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
nor->flash_read = SPI_NOR_DUAL;
}

+ if (info->addr_width)
+ nor->addr_width = info->addr_width;
+ else if (mtd->size > 0x1000000) {
+ /* enable 4-byte addressing if the device exceeds 16MiB */
+ nor->addr_width = 4;
+ } else {
+ nor->addr_width = 3;
+ }
+scan_done:
+
/* Default commands */
switch (nor->flash_read) {
case SPI_NOR_QUAD:
@@ -1099,11 +1749,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)

nor->program_opcode = SPINOR_OP_PP;

- if (info->addr_width)
- nor->addr_width = info->addr_width;
- else if (mtd->size > 0x1000000) {
- /* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
+ if (info->addr_width == 4) {
if (JEDEC_MFR(info) == CFI_MFR_AMD) {
/* Dedicated 4-byte command set */
switch (nor->flash_read) {
@@ -1126,8 +1772,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
mtd->erasesize = info->sector_size;
} else
set_4byte(nor, info, 1);
- } else {
- nor->addr_width = 3;
}

nor->read_dummy = spi_nor_read_dummy_cycles(nor);
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 63aeccf..8f8f892 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -35,6 +35,11 @@
#define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */
#define SPINOR_OP_RDCR 0x35 /* Read configuration register */
#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */
+#define SPINOR_OP_WRSCUR 0x2f /* Write security register */
+#define SPINOR_OP_RDSCUR 0x2b /* Read security register */
+#define SPINOR_OP_SUSPEND 0xb0 /* Erase/program suspend */
+#define SPINOR_OP_RESUME 0x30 /* Erase/program resume */
+#define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */

/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
#define SPINOR_OP_READ4 0x13 /* Read data bytes (low frequency) */
@@ -53,6 +58,23 @@
#define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */
#define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */

+/* Used for Macronix flashes. */
+#define SPINOR_OP_DP 0xb9 /* Deep power-down */
+#define SPINOR_OP_RDP 0xab /* Release from deep power-down */
+#define SPINOR_OP_ENSO 0xb1 /* Enter secured OTP */
+#define SPINOR_OP_EXSO 0xc1 /* Exit secured OTP */
+#define SPINOR_OP_WPSEL 0x68 /* Write protect selection */
+#define SPINOR_OP_SBLK 0x36 /* Single block lock */
+#define SPINOR_OP_SBULK 0x39 /* Single block unlock */
+#define SPINOR_OP_GBLK 0x7e /* Gang block lock */
+#define SPINOR_OP_GBULK 0x98 /* Gang block unlock */
+#define SPINOR_OP_RDBLOCK 0x3c /* Read block lock status */
+#define SPINOR_OP_WRSPB 0xe3 /* Write solid protection bit */
+#define SPINOR_OP_RDSPB 0xe2 /* Read solid protection bit */
+#define SPINOR_OP_ESSPB 0xe4 /* Rease solid protection bit */
+#define SPINOR_OP_WRDPB 0xe1 /* Write dynamic protection bit */
+#define SPINOR_OP_RDDPB 0xe0 /* Write dynamic protection bit */
+
/* Used for Spansion flashes only. */
#define SPINOR_OP_BRWR 0x17 /* Bank register write */

@@ -80,6 +102,185 @@ enum read_mode {
SPI_NOR_QUAD,
};

+enum macronix_lock_type {
+ MX_SBLK = 0,
+ MX_SPB,
+ MX_DPB,
+};
+
+/**
+ * struct sfdp_vendor_macronix - Macronix SFDP parameter table
+ * @vcc_supply_max_voltage: Maximun voltage of chip
+ * @vcc_supply_min_voltage: Minimun voltage of chip
+ * @f_param: Macronix flash parameters:
+ * Bit 0: support of H/W Reset# pin
+ * Bit 1: support of H/W Hold# pin
+ * Bit 2: support of deep power down mode
+ * Bit 3: support of S/W Reset
+ * Bit 4~11: software reset instruction
+ * Bit 12: support of program suspend/resume
+ * Bit 13: support of erase suspend/resume
+ * Bit 15: support of wrap-around read
+ * @wrap_around_read_opcode: Wrap around read instrction
+ * @wrap_around_read_length: Wrap around read length
+ * @protection_param: Protection related parameters:
+ * Bit 0: support of individual block lock
+ * Bit 1: individual lock bits
+ * Bit 2~9: individual block lock opcode
+ * Bit 10: default status of individual lock
+ * Bit 11: support of security OTP
+ * Bit 12: support of read lock
+ * Bit 13: support of permanent lock
+ */
+struct sfdp_macronix_params {
+ u16 vcc_supply_max_voltage;
+ u16 vcc_supply_min_voltage;
+ u16 f_param;
+ u8 wrap_around_read_opcode;
+ u8 wrap_around_read_length;
+ u16 protection_param;
+ u8 reserved[6];
+};
+
+/**
+ * struct sfdp_erase_type - SFDP erase type parameter
+ * @size_power: Erase size (2 to the n-th power)
+ * @opcode: Erase instruction
+ */
+struct sfdp_erase_type {
+ u8 size_power;
+ u8 opcode;
+};
+
+/**
+ * struct sfdp_jedec_params - Basic JEDEC parameters of SFDP
+ * @f_param: JEDEC flash parameters:
+ * Bit 0~1: Block/sector erase size
+ * Bit 2: write granularity (0 - 1B, 1 - 64B)
+ * Bit 3~4: command of write enable
+ * @be_4k_opcode: 4KByte block/sector erase instruction
+ * @fr_support: Fast read supports:
+ * Bit 0: support of fast read 1-1-2
+ * Bit 1~2: address width
+ * Bit 3: support of DTR
+ * Bit 4~6: support of fast read 1-2-2, 1-4-4, 1-1-4
+ * @flash_density: Flash memory density
+ * @fr_XXX_param: (X-X-X) Fast read parameters:
+ * Bit 0~4: number of dummy clocks
+ * Bit 5~7: number of mode clocks
+ * @fr_XXX_opcode: (X-X-X) Fast read instruction
+ * @fr_222_444_support: Fast read (2-2-2/4-4-4) supports:
+ * Bit 0: support of fast read 2-2-2
+ * Bit 4: support of fast read 4-4-4
+ * @erase_type: Erase type (size & instruction)
+ * @e_param: Erase parameters (timing):
+ * Bit 0~3: multiplier from typical to max erase time
+ * Bit 4~32: typical time of each type of erase
+ * @p_param: Program parameters:
+ * Bit 0~3: multiplier from typical to max program time
+ * Bit 4~7: page size (2 to the n-th power)
+ * Bit 8~30: typical time of PP, BP and chip erase
+ * @susp_param: Suspend/Resume parameters:
+ * Bit 0~7: prohibited operations during suspend
+ * Bit 9~30: timing defininition
+ * Bit 31: support of suspend/resume
+ * @p_resu_opcode: Program resume instruction
+ * @p_susp_opcode: Program suspend instruction
+ * @resu_opcode: Write/Erase resume instruction
+ * @susp_opcode: Write/Erase suspend instruction
+ * @dp_param: Deep powerdown parameters:
+ * Bit 2~14: delay and SR polliong
+ * Bit 15~22: exit deep powerdown instruction
+ * Bit 23~30: enter deep powerdown instruction
+ * Bit 31: support of deep powerdown
+ * @fr_quad_param: (X-4-4) Fast read parameters:
+ * Bit 0~8: 4-4-4 mode disable/enable sequences
+ * Bit 9: support of fast read 0-4-4
+ * Bit 10~19: 0-4-4 mode exit/entry method
+ * Bit 20~22: quad enable requirements (QER)
+ * Bit 23: HOLD or RESET disable
+ * @en4b_param: Method of enter 4-byte address
+ * @ex4b_softreset_param: method of exit 4-byte address and software reset
+ * @sr_param: Volatile/Non-volatile status register 1 parameters
+ */
+struct sfdp_jedec_params {
+ u8 f_param;
+ u8 be_4k_opcode;
+ u8 fr_support;
+ u8 reserved1;
+ u32 flash_density;
+
+ u8 fr_144_param;
+ u8 fr_144_opcode;
+ u8 fr_114_param;
+ u8 fr_114_opcode;
+ u8 fr_112_param;
+ u8 fr_112_opcode;
+ u8 fr_122_param;
+ u8 fr_122_opcode;
+
+ u8 fr_222_444_support;
+ u8 reserved2[5];
+ u8 fr_222_param;
+ u8 fr_222_opcode;
+ u8 reserved3[2];
+ u8 fr_444_param;
+ u8 fr_444_opcode;
+
+ struct sfdp_erase_type e_type[4];
+
+ u32 e_param;
+ u32 p_param;
+ u32 susp_param;
+ u8 p_resu_opcode;
+ u8 p_susp_opcode;
+ u8 resu_opcode;
+ u8 susp_opcode;
+ u32 dp_param;
+ u32 fr_quad_param;
+ u8 en4b_param;
+ u16 ex4b_softreset_param;
+ u8 sr_param;
+};
+
+/**
+ * struct sfdp_param_header - SFDP parameter header
+ * @id: Parameter ID LSB (manufacture ID)
+ * @minor_rev: Parameter table minor revision number
+ * @major_rev: Parameter table major revision number
+ * @length: Parameter table length (DWORDs)
+ * @pointer: Parameter table pointer (start address)
+ * @id_reserved: Parameter ID MSB
+ */
+struct sfdp_param_header {
+ u8 id;
+ u8 minor_rev;
+ u8 major_rev;
+ u8 length;
+ u8 pointer[3];
+ u8 id_reserved;
+};
+
+/* SFDP signature (ASCII: 'S' 'F' 'D' 'P') */
+#define SFDP_SIGNATURE 0x50444653
+
+/**
+ * struct spi_nor_sfdp_params - Serial Flash Discoverable Parameters
+ * @signature: SFDP signature for identification
+ * @minor_rev: SFDP minor revision number
+ * @major_rev: SFDP major revision number
+ * @num_of_param_header: Number of parameter headers (0 indicates 1 header)
+ * @header: Header of JEDEC or vendor's parameters
+ */
+struct spi_nor_sfdp_params {
+ u32 signature;
+ u8 minor_rev;
+ u8 major_rev;
+ u8 num_of_param_header;
+ u8 reserved0;
+ struct sfdp_param_header header[5];
+};
+
/**
* struct spi_nor_xfer_cfg - Structure for defining a Serial Flash transfer
* @wren: command for "Write Enable", or 0x00 for not required
--
1.9.1


\
 
 \ /
  Last update: 2015-02-05 20:21    [W:0.661 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site