lkml.org 
[lkml]   [2015]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH_V4 0/3] sound:soc: jz4740: Add DT, dynamic sampling
    Date
    Hi,

    Here are a few simple patches for the jz4740.

    First adds dynamic sampling support to jz4740-i2s.
    Then two to add a simple binding and DT support.
    Then a patch to set the clock rate for i2s.

    These are in preparation for jz4780 and ci20 later on.

    Patches are based on 3.19-rc7. Quite disjoint and stay within jz4740
    so should apply easily on other trees.

    If you would like to have them rebased to a different tree, please tell.

    Thank-you

    V4 changes:
    Added Acked-by: Lars-Peter Clausen <lars@metafoo.de>
    Rebased on 3.19-rc7
    Removed patch 4 which was redundant

    V3 changes:
    Added dma binding to example but forgot to put it in required properties.

    V2 changes:
    Removed a redundant #define
    Added #ifdef CONFIG_OF
    Added dma in binding document
    Removed a redundant call to clk_prepare_enable

    Zubair Lutfullah Kakakhel (3):
    sound: soc: jz4740: Add dynamic sampling rate support to jz4740-i2s
    dt: sound: jz4740: Add binding documentation for jz4740-i2s
    sound: soc: jz4740: Add DT support to jz4740-i2s driver

    .../bindings/sound/ingenic,jz4740-i2s.txt | 23 ++++++++++++++++++++++
    sound/soc/jz4740/jz4740-i2s.c | 21 +++++++++++++++++++-
    2 files changed, 43 insertions(+), 1 deletion(-)
    create mode 100644 Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt

    --
    1.9.1



    \
     
     \ /
      Last update: 2015-02-03 12:01    [W:2.054 / U:0.056 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site