lkml.org 
[lkml]   [2015]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] mtd: nand: fully initialize mtd_oob_ops
Date
We're not initializing the ooblen field. Our users don't care, since
they check that oobbuf == NULL first, but it's good practice to zero
unused fields out.

We can drop the NULL initializations since we're memset()ing the whole
thing.

Noticed by Coverity, CID #200821, #200822

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/nand/nand_base.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 5488a7ad63e7..d4cec2f8a016 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -386,7 +386,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
uint8_t buf[2] = { 0, 0 };
int ret = 0, res, i = 0;

- ops.datbuf = NULL;
+ memset(&ops, 0, sizeof(ops));
ops.oobbuf = buf;
ops.ooboffs = chip->badblockpos;
if (chip->options & NAND_BUSWIDTH_16) {
@@ -1716,9 +1716,9 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
int ret;

nand_get_device(mtd, FL_READING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_read_ops(mtd, from, &ops);
*retlen = ops.retlen;
@@ -2508,9 +2508,9 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
/* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);

+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;

ret = nand_do_write_ops(mtd, to, &ops);
@@ -2536,9 +2536,9 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
int ret;

nand_get_device(mtd, FL_WRITING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
*retlen = ops.retlen;
--
2.1.0


\
 
 \ /
  Last update: 2015-02-28 11:21    [W:0.469 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site