lkml.org 
[lkml]   [2015]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 2/4] mfd: lubbock_cplds: add lubbock IO board
Date
Robert Jarzmik <robert.jarzmik@free.fr> writes:

> Hi Arnd and Greg,
It's been a week, backlog ping ?

>
> I have this driver I'm upstreaming, which comes out of
> arch/arm/mach-pxa/lubbock.c. As for the reason it is extracted, see submitted
> commit [1] for reference.
>
> The main question is : where does it belong in the kernel ?
>
> The driver is :
> - for the CPLDs on the Lubbock development platform, which is more or less an
> old motherboard for Intel Xscale pxa255 SoC (see [2] for more details)
> - these CPLDs control :
> - interrupt muxing towards the SoC
> - several leds
> - switches read back
> For the whole patch, see [4]
>
> Lee's position is that it doesn't belong to drivers/mfd, see [3].
>
> So where should I submit it ? And more generally, where should CPLDs drivers be
> pushed in the kernel tree ?
>
> If there is no solution, I'll fallback through arch/arm/plat-pxa, not very nice,
> but it has to land somewhere, I don't want lubbock to remain broken.
>
> Cheers.
>
> --
> Robert
>
> [1] Reason of extraction / commit message
> mfd: lubbock_cplds: add lubbock IO board
>
> Lubbock () board is the IO motherboard of the Intel PXA25x Development
> Platform, which supports the Lubbock pxa25x soc board.
>
> Historically, this support was in arch/arm/mach-pxa/lubbock.c. When
> gpio-pxa was moved to drivers/pxa, it became a driver, and its
> initialization and probing happened at postcore initcall. The lubbock
> code used to install the chained lubbock interrupt handler at init_irq()
> time.
>
> The consequence of the gpio-pxa change is that the installed chained irq
> handler lubbock_irq_handler() was overwritten in pxa_gpio_probe(_dt)(),
> removing :
> - the handler
> - the falling edge detection setting of GPIO0, which revealed the
> interrupt request from the lubbock IO board.
>
> As a fix, move the gpio0 chained handler setup to a place where we have
> the guarantee that pxa_gpio_probe() was called before, so that lubbock
> handler becomes the true IRQ chained handler of GPIO0, demuxing the
> lubbock IO board interrupts.
>
> This patch moves all that handling to a mfd driver. It's only purpose
> for the time being is the interrupt handling, but in the future it
> should encompass all the motherboard CPLDs handling :
> - leds
> - switches
> - hexleds
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
>
> [2] Board description by Nicolas
>>> The Lubbock is an ancient development board (circa 2003) using a CPLD to
>>> multiplex a couple things on the board. I really doubt anyone would
>>> reprogram this CPLD at this point. So I'd treat it just like another
>>> interrupt controller + random peripherals that will never change. And
>>> yes, maybe a more appropriate name is needed.
>
> [3] Lee's position
>>> > I don't think this is correct either. CPLD handling would probably be
>>> > slightly less out of place in drivers/misc, but perhaps a new
>>> > subsystem for PLDs/CPLDs/FPGAs would be more appropriate
>>> > drivers/programmables or similar maybe.
>>> >
> ...
>>> > I'm pretty convinced that it doesn't belong in MFD now, but it doesn't
>>> > mean I'm going to leave you on the curb. I'd like to help you get it
>>> > into a better home.
>>> >
>>> > [...]
>>> > > Is not only a irqchip because, as explained at the bottom of the commit message,
>>> > > quoting myself :
>>> > > This patch moves all that handling to a mfd driver. It's only purpose
>>> > > for the time being is the interrupt handling, but in the future it
>>> > > should encompass all the motherboard CPLDs handling :
>>> > > - leds
>>> > > - switches
>>> > > - hexleds
>>> >
>>> > I had a conversation about this on IRC yesterday and some good
>>> > points/questions were posed. This is a difficult area, because you
>>> > can program these things to do whatever you like. Depending on the
>>> > 'intention' (and it is only an intention -- someone else can come
>>> > along and reprogram these devices on a whim), the CPLD code could live
>>> > anywhere. If you wanted to put watchdog functionality in there, then
>>> > there is an argument for it to live in drivers/watchdog, etc etc. So
>>> > just because the plan is to support a few (i.e. more than one) simple
>>> > devices, it doesn't necessarily mean that the handling should be done
>>> > in MFD.
>>> >
>>> > Yesterday I was asked "Are you wanting to restrict drivers in
>>> > drivers/mfd to those that make use of MFD_CORE functionality?". My
>>> > answer to that was "No, however; I only want devices which
>>> > _intrinsically_ operate in multiple subsystems", which these
>>> > programmables no not do.
>>> >
>>> > FYI, you're not on your own here. There is at least one of these
>>> > devices in the kernel already and upon a short inspection there
>>> > appears to be a number of Out-of-Tree (OoT) drivers out there which
>>> > will require a home in Mainline sooner or later.
>>> >
>
> [4] Whole patch
> https://lkml.org/lkml/2015/1/24/90

--
Robert


\
 
 \ /
  Last update: 2015-02-28 11:21    [W:0.128 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site