lkml.org 
[lkml]   [2015]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/4] clk: Provide always-on clock support
From
On 28 February 2015 at 02:44, Lee Jones <lee.jones@linaro.org> wrote:
> Lots of platforms contain clocks which if turned off would prove fatal.
> The only way to recover from these catastrophic failures is to restart
> the board(s). Now, when a clock is registered with the framework it is
> compared against a list of provided always-on clock names which must be
> kept ungated. If it matches, we enable the existing CLK_IGNORE_UNUSED
> flag, which will prevent the common clk framework from attempting to
> gate it during the clk_disable_unused() procedure.
>
If a clock is critical on a certain board, it could be got+enabled
during early boot so there is always a user.
To be able to do that from DT, maybe add a new, say, CLK_ALWAYS_ON
flag could be made to initialize the clock with one phantom user
already. Or just reuse the CLK_IGNORE_UNUSED?

-Jassi


\
 
 \ /
  Last update: 2015-02-28 10:41    [W:1.453 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site