lkml.org 
[lkml]   [2015]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/5] usb: phy: ab8500-usb: Rename regulator_set_optimum_mode
On Wed, Feb 11, 2015 at 07:35:29PM -0800, Bjorn Andersson wrote:
> The function regulator_set_optimum_mode() is changing name to
> regulator_set_load(), so update the code accordingly.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>

since this depends on the rest of the series:

Acked-by: Felipe Balbi <balbi@ti.com>

> ---
> drivers/usb/phy/phy-ab8500-usb.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
> index 0b1bd23..f5b3b92 100644
> --- a/drivers/usb/phy/phy-ab8500-usb.c
> +++ b/drivers/usb/phy/phy-ab8500-usb.c
> @@ -277,7 +277,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
> dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n",
> ret);
>
> - ret = regulator_set_optimum_mode(ab->v_ulpi, 28000);
> + ret = regulator_set_load(ab->v_ulpi, 28000);
> if (ret < 0)
> dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
> ret);
> @@ -317,7 +317,7 @@ static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
> ab->saved_v_ulpi, ret);
> }
>
> - ret = regulator_set_optimum_mode(ab->v_ulpi, 0);
> + ret = regulator_set_load(ab->v_ulpi, 0);
> if (ret < 0)
> dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
> ret);
> --
> 1.8.2.2
>

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-02-27 16:41    [W:0.143 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site