lkml.org 
[lkml]   [2015]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V7 07/11] USB: f81232: implement port_enable function
Date
We put FCR/IER initial step to f81232_port_enable(). When port is open,
it set MSR interrupt on. Otherwise set it off.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
---
drivers/usb/serial/f81232.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 21f606f..f5c9060 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -37,6 +37,8 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define F81232_SET_REGISTER 0x40

#define SERIAL_BASE_ADDRESS 0x0120
+#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)

@@ -367,6 +369,33 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
*/
}

+static int f81232_port_enable(struct usb_serial_port *port, int enable)
+{
+ u8 data = 0;
+ int status;
+
+ /* fifo on, trigger8, clear TX/RX*/
+ data = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR
+ | UART_FCR_CLEAR_XMIT;
+
+ status = f81232_set_register(port, FIFO_CONTROL_REGISTER, data);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set FCR: %d\n", __func__, status);
+ return status;
+ }
+
+ /* MSR Interrupt only, LSR will read from Bulk-in odd byte */
+ data = enable ? UART_IER_MSI : 0;
+
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, data);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set IER: %d\n", __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
static void f81232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -418,6 +447,12 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result;

+ result = f81232_port_enable(port, 1);
+ if (result) {
+ dev_err(&port->dev, "%s - init fail: %d\n", __func__, result);
+ return result;
+ }
+
/* Setup termios */
if (tty)
f81232_set_termios(tty, port, NULL);
@@ -440,6 +475,10 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)

static void f81232_close(struct usb_serial_port *port)
{
+ int result = f81232_port_enable(port, 0);
+ if (result)
+ dev_err(&port->dev, "%s - init fail: %d\n", __func__, result);
+
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
}
--
1.9.1


\
 
 \ /
  Last update: 2015-02-24 11:21    [W:0.086 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site