lkml.org 
[lkml]   [2015]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clocksource: mips-gic: Allow GIC clock to be specified in device-tree
Date
As an alternative to the "clock-frequency" property, allow the GIC
timer operating clock to be specified in the device-tree instead.
This is useful on systems which use common clock or where the GIC
is not fixed to a particular frequency and is instead, for example,
derived from the CPU clock.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
---
.../devicetree/bindings/interrupt-controller/mips-gic.txt | 5 +++++
drivers/clocksource/mips-gic-timer.c | 10 +++++++++-
2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
index 5a65478..aae4c38 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
@@ -27,8 +27,13 @@ Optional properties:
Required properties for timer sub-node:
- compatible : Should be "mti,gic-timer".
- interrupts : Interrupt for the GIC local timer.
+
+Optional properties for timer sub-node:
+- clocks : GIC timer operating clock.
- clock-frequency : Clock frequency at which the GIC timers operate.

+Note that one of clocks or clock-frequency must be specified.
+
Example:

gic: interrupt-controller@1bdc0000 {
diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index 3bd31b1..1809f52 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -5,6 +5,7 @@
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
+#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/cpu.h>
#include <linux/init.h>
@@ -146,11 +147,18 @@ void __init gic_clocksource_init(unsigned int frequency)

static void __init gic_clocksource_of_init(struct device_node *node)
{
+ struct clk *clk;
+
if (WARN_ON(!gic_present || !node->parent ||
!of_device_is_compatible(node->parent, "mti,gic")))
return;

- if (of_property_read_u32(node, "clock-frequency", &gic_frequency)) {
+ clk = of_clk_get(node, 0);
+ if (!IS_ERR(clk)) {
+ gic_frequency = clk_get_rate(clk);
+ clk_put(clk);
+ } else if (of_property_read_u32(node, "clock-frequency",
+ &gic_frequency)) {
pr_err("GIC frequency not specified.\n");
return;
}
--
2.2.0.rc0.207.ga3a616c


\
 
 \ /
  Last update: 2015-02-24 03:41    [W:0.037 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site