lkml.org 
[lkml]   [2015]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] of: DT quirks infrastructure
Hi Rob,

On Fri, Feb 20, 2015 at 11:30:12AM -0600, Rob Herring wrote:
> On Fri, Feb 20, 2015 at 8:35 AM, Ludovic Desroches
> <ludovic.desroches@atmel.com> wrote:
> > On Fri, Feb 20, 2015 at 09:21:38AM -0500, Peter Hurley wrote:
> >> On 02/19/2015 12:38 PM, Pantelis Antoniou wrote:
> >> >
> >> >> On Feb 19, 2015, at 19:30 , Frank Rowand <frowand.list@gmail.com> wrote:
> >> >>
> >> >> On 2/19/2015 9:00 AM, Pantelis Antoniou wrote:
> >> >>> Hi Frank,
>
> [...]
>
> >> >>> This is one of those things that the kernel community doesn’t understand which makes people
> >> >>> who push product quite mad.
> >> >>>
> >> >>> Engineering a product is not only about meeting customer spec, in order to turn a profit
> >> >>> the whole endeavor must be engineered as well for manufacturability.
> >> >>>
> >> >>> Yes, you can always manually install files in the bootloader. For 1 board no problem.
> >> >>> For 10 doable. For 100 I guess you can hire an extra guy. For 1 million? Guess what,
> >> >>> instead of turning a profit you’re losing money if you only have a few cents of profit
> >> >>> per unit.
> >> >>
> >> >> I'm not installing physical components manually. Why would I be installing software
> >> >> manually? (rhetorical question)
> >> >>
> >> >
> >> > Because on high volume product runs the flash comes preprogrammed and is soldered as is.
> >> >
> >> > Having a single binary to flash to every revision of the board makes logistics considerably
> >> > easier.
> >> >
> >> > Having to boot and tweak the bootloader settings to select the correct dtb (even if it’s present
> >> > on the flash medium) takes time and is error-prone.
> >> >
> >> > Factory time == money, errors == money.
> >> >
> >> >>>
> >> >>> No knobs to tweak means no knobs to break. And a broken knob can have pretty bad consequences
> >> >>> for a few million units.
> >> >>
> >> >> And you produce a few million units before testing that the first one off the line works?
> >> >>
> >> >
> >> > The first one off the line works. The rest will get some burn in and functional testing if you’re
> >> > lucky. In many cases where the product is very cheap it might make financial sense to just ship
> >> > as is and deal with recalls, if you’re reasonably happy after a little bit of statistical sampling.
> >> >
> >> > Hardware is hard :)
> >>
> >> I'm failing to see how this series improves your manufacturing process at all.
> >>
> >> 1. Won't you have to provide the factory with different eeprom images for the
> >> White and Black? You _trust_ them to get that right, or more likely, you
> >> have process control procedures in place so that you don't get 1 million Blacks
> >> flashed with the White eeprom image.
> >>
> >> 2. The White and Black use different memory technology so it's not as if the
> >> eMMC from the Black will end up on the White SMT line (or vice versa).
> >>
> >> 3 For that matter, why wouldn't you worry that all the microSD cards intended
> >> for the White were accidentally assembled with the first 50,000 Blacks; at
> >> that point you're losing a lot more than a few cents of profit. And that has
> >> nothing to do with what image you provided.
> >>
> >
> > As you said, we can imagine many reasons to have a failure during the
> > production, having several DTB files will increase the risk.
>
> Then package them as a single file. You can even use DT to do that.
> See u-boot FIT image.
>
> Rob

It is acualyy what we did but we are not happy with this solution
because as said previously we rely on U-Boot and on dts/dtsi side we
have too many files.

Regards

Ludovic


\
 
 \ /
  Last update: 2015-02-23 08:21    [W:0.105 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site