lkml.org 
[lkml]   [2015]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
Hi, Alim

Sorry for late reply.

On 2015/2/16 07:28, Alim Akhtar wrote:
> Hi Addy,
>
> On Sat, Feb 14, 2015 at 11:47 AM, Addy Ke <addy.ke@rock-chips.com> wrote:
>> As show in mmc_power_up(), in MMC_POWER_UP state, the voltage isn't
>> stable and we may get 'data busy' which can't be cleaned by resetting
>> all blocks. So we should not send command to update clock in this state.
>>
>> Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
>> ---
>> drivers/mmc/host/dw_mmc.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 4d2e3c2..3472f9b 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -1102,7 +1102,8 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>> drv_data->set_ios(slot->host, ios);
>>
>> /* Slot specific timing and width adjustment */
>> - dw_mci_setup_bus(slot, false);
>> + if (ios->power_mode != MMC_POWER_UP)
>> + dw_mci_setup_bus(slot, false);
>>
> This looks a HACK to me.
> If stabilizing host voltage regulator is the problem, can you try out
> below patch, and see if this resolve your issue?

I have test by:
cd /sys/bus/platform/drivers/dwmmc_rockchip
for i in $(seq 1 10000); do
echo "========================" $i
echo ff0c0000.dwmmc > unbind
sleep .5
echo ff0c0000.dwmmc > bind
sleep 2
done

There is no error.
I think this patch can resolve my issue, thank you.

Do you send this patch upstream, or can I put it in my patch list?

>
> ===========
> [PATCH] mmc: dw_mmc: Wait for host voltage regulator to be stable
>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
> drivers/mmc/host/dw_mmc.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 4d2e3c2..dc10fbb 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1202,6 +1202,9 @@ static int dw_mci_switch_voltage(struct mmc_host
> *mmc, struct mmc_ios *ios)
> }
> mci_writel(host, UHS_REG, uhs);
>
> + /* wait for 5ms so that host voltage regulator is stable */
> + usleep_range(5000, 5500);
> +
> return 0;
> }
>
> ===============
>
>> if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
>> slot->host->state = STATE_IDLE;
>> --
>> 1.8.3.2
>>
>>
>
>
>



\
 
 \ /
  Last update: 2015-02-19 11:41    [W:0.179 / U:5.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site