lkml.org 
[lkml]   [2015]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/2] leds: add Qualcomm PM8941 WLED driver
From
On Thu, Feb 12, 2015 at 8:26 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:
> On 01/23/15 16:54, Bjorn Andersson wrote:
>> +
>> +static int pm8941_wled_set(struct led_classdev *cdev,
>> + enum led_brightness value)
>> +{
>> + struct pm8941_wled *wled;
>> + u8 ctrl = 0;
>> + u16 val;
>> + int rc;
>> + int i;
>> +
>> + wled = container_of(cdev, struct pm8941_wled, cdev);
>> +
>> + if (value != 0)
>> + ctrl = PM8941_WLED_REG_MOD_EN_BIT;
>> +
>> + val = value * PM8941_WLED_REG_VAL_MAX / LED_FULL;
>> +
>> + rc = regmap_update_bits(wled->regmap,
>> + wled->addr + PM8941_WLED_REG_MOD_EN,
>> + PM8941_WLED_REG_MOD_EN_MASK, ctrl);
>> + if (rc)
>> + return rc;
>> +
>> + for (i = 0; i < wled->cfg.num_strings; ++i) {
>> + u8 v[2] = { val & 0xff, (val >> 8) & 0xf };
>> +
>> + rc = regmap_bulk_write(wled->regmap,
>> + wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i,
>> + v, 2);
>> + if (rc)
>> + return rc;
>> + }
>> +
>> + rc = regmap_update_bits(wled->regmap,
>> + wled->addr + PM8941_WLED_REG_SYNC,
>> + PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL);
>> + if (rc)
>> + return rc;
>> +
>> + rc = regmap_update_bits(wled->regmap,
>> + wled->addr + PM8941_WLED_REG_SYNC,
>> + PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR);
>> + return rc;
>> +}
>
> This doesn't seem to do anything for the OVP spike mentioned in this
> patch[1]. Do you see that problem on your device? I imagine the PMIC is
> the same.
>
> [1]
> https://www.codeaurora.org/cgit/quic/la/kernel/msm/commit/?id=fef9e15072562f0f28dc7066dcdd69388df81ed3
>

That's odd, I can't find that fix in any officially supported releases
for 8974 - which Courtney used as reference for this driver.

Just to make sure I understand the solution; when disabling the sinks
the over-voltage-protection sometimes triggers, so we should detect
that and reset the ovp configuration?

I presume the side effect would be that the sinks would not give any
output until this is done?

Regards,
Bjorn


\
 
 \ /
  Last update: 2015-02-18 00:21    [W:0.155 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site