lkml.org 
[lkml]   [2015]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/3] about data busy
Date
patch 1: This patch can fix bug that controller is still data busy after
reset all blocks. After this patch, I still get data busy in
set_ios().

patch 2: This patch fix bug 'Timeout sending command'. After patch1 and
patch2, there is no mmc errors after:
cd /sys/bus/platform/drivers/dwmmc_rockchip
for i in $(seq 1 10000); do
echo "========================" $i
echo ff0c0000.dwmmc > unbind
sleep .5
echo ff0c0000.dwmmc > bind
sleep 2
done

patch3: This patch fix bug that there is data busy before sdio send CMD53.
But This patch is necessary for sd and mmc too.

Addy Ke (3):
mmc: dw_mmc: update clock after host reach a stable voltage
mmc: dw_mmc: fix bug that cause 'Timeout sending command'
mmc: dw_mmc: Don't start command while data busy

drivers/mmc/host/dw_mmc.c | 41 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)

--
1.8.3.2




\
 
 \ /
  Last update: 2015-02-14 07:41    [W:0.263 / U:5.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site