lkml.org 
[lkml]   [2015]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] net: phy: micrel: disable NAND-tree for KSZ8021,KSZ8031,KSZ8051,KSZ8081
From
From: Sylvain Rochet <sylvain.rochet@finsecur.com>
Date: Fri, 13 Feb 2015 21:35:33 +0100

> NAND-tree is used to check wiring between MAC and PHY using NAND gates
> on the PHY side, hence the name.
>
> NAND-tree initial status is latched at reset by probing the IRQ pin.
> However some devices are sharing the PHY IRQ pin with other peripherals
> such as Atmel SAMA5D[34]x-EK boards when using the optional TM7000
> display module, therefore they are switching the PHY in NAND-tree test
> mode depending on the current IRQ line status at reset.
>
> This patch ensure PHY is not in NAND-tree test mode for all Micrel PHYs
> using IRQ line as a NAND-tree toggle mode at reset.
>
> Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

Applied.


\
 
 \ /
  Last update: 2015-02-15 05:41    [W:0.031 / U:37.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site