lkml.org 
[lkml]   [2015]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] dma: imx-sdma: switch to dynamic context mode after script loaded
On Thu, Jan 22, 2015 at 03:23:40PM +0800, Robin Gong wrote:
> Below comments got from Page4724 of Reference Manual of i.mx6q:
> http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf
>
> --"Static context mode should be used for the first channel called
> after reset to ensure that the all context RAM for that channel is
> initialized during the context SAVE phase when the channel is
> done or yields. Subsequent calls to the same channel or
> different channels may use any of the dynamic context modes.
> This will ensure that all context locations for the bootload
> channel are initialized, and prevent undefined values in context
> RAM from being loaded during the context restore if the
> channel is re-started later"
>
> Unfortunately, the rule was broken by commit(5b28aa319bba96987316425a1131813d87cbab35)
> .This patch just take them back.
Applied, thanks

Pls ensure you use the right subsystem name

--
~Vinod



\
 
 \ /
  Last update: 2015-02-12 08:41    [W:0.044 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site