lkml.org 
[lkml]   [2015]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 2/3] r8152: change rx early size when the mtu is changed
Date
The rx early size is calculated with the mtu, so it has to be
re-calculated when the mtu is changed.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index b2e6566..46b99c6 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3722,6 +3722,7 @@ out:
static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
{
struct r8152 *tp = netdev_priv(dev);
+ int ret;

switch (tp->version) {
case RTL_VER_01:
@@ -3734,9 +3735,22 @@ static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
if (new_mtu < 68 || new_mtu > RTL8153_MAX_MTU)
return -EINVAL;

+ ret = usb_autopm_get_interface(tp->intf);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&tp->control);
+
dev->mtu = new_mtu;

- return 0;
+ if (netif_running(dev) && netif_carrier_ok(dev))
+ r8153_set_rx_early_size(tp);
+
+ mutex_unlock(&tp->control);
+
+ usb_autopm_put_interface(tp->intf);
+
+ return ret;
}

static const struct net_device_ops rtl8152_netdev_ops = {
--
2.1.0


\
 
 \ /
  Last update: 2015-02-12 07:41    [W:0.097 / U:2.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site