Messages in this thread Patch in this message | | | From | Wenyou Yang <> | Subject | [PATCH 3/3] pm: at91: remove CONFIG_AT91_SLOW_CLOCK config option | Date | Thu, 12 Feb 2015 10:33:34 +0800 |
| |
The slow clock always exists, selecting CONFIG_AT91_SLOW_CLOCK config is unnecessary for the suspend to memory mode. For this mode the master clock should always switch to the slow clock.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- arch/arm/mach-at91/Kconfig | 13 ------------- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/pm.c | 12 +----------- 3 files changed, 2 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 6b9e685..3a5e46a 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -120,19 +120,6 @@ endif # SOC_SAM_V4_V5 comment "AT91 Feature Selections" -config AT91_SLOW_CLOCK - bool "Suspend-to-RAM disables main oscillator" - depends on SUSPEND - help - Select this if you want Suspend-to-RAM to save the most power - possible (without powering off the CPU) by disabling the PLLs - and main oscillator so that only the 32 KiHz clock is available. - - When only that slow-clock is available, some peripherals lose - functionality. Many can't issue wakeup events unless faster - clocks are available. Some lose their operating state and - need to be completely re-initialized. - config AT91_TIMER_HZ int "Kernel HZ (jiffies per second)" range 32 1024 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 827fdbc..103c256 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_SOC_SAMA5) += sama5.o # Power Management obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o +obj-$(CONFIG_PM) += pm_slowclock.o ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index daa998d..f358e7d 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -135,11 +135,9 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock); static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); -#ifdef CONFIG_AT91_SLOW_CLOCK extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); extern u32 at91_slow_clock_sz; -#endif static int at91_pm_enter(suspend_state_t state) { @@ -163,10 +161,9 @@ static int at91_pm_enter(suspend_state_t state) * turning off the main oscillator; reverse on wakeup. */ if (slow_clock) { -#ifdef CONFIG_AT91_SLOW_CLOCK /* copy slow_clock handler to SRAM, and call it */ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); -#endif + slow_clock(at91_pmc_base, at91_ramc_base[0], at91_ramc_base[1], at91_pm_data.memctrl); @@ -275,7 +272,6 @@ static void at91_dt_ramc(void) at91_pm_set_standby(standby); } -#ifdef CONFIG_AT91_SLOW_CLOCK static void __init at91_pm_sram_init(void) { struct gen_pool *sram_pool; @@ -314,16 +310,10 @@ static void __init at91_pm_sram_init(void) put_node: of_node_put(node); } -#endif - static void __init at91_pm_init(void) { -#ifdef CONFIG_AT91_SLOW_CLOCK at91_pm_sram_init(); -#endif - - pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : "")); if (at91_cpuidle_device.dev.platform_data) platform_device_register(&at91_cpuidle_device); -- 1.7.9.5
| |