lkml.org 
[lkml]   [2015]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/9] mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller
Boris,

On Mon, Feb 09, 2015 at 12:55:03AM +0100, Boris Brezillon wrote:
> On Tue, 27 Jan 2015 15:10:12 +0100
> Antoine Tenart <antoine.tenart@free-electrons.com> wrote:
>
> >
> > + if (info->variant == PXA3XX_NAND_VARIANT_BERLIN2 &&
> > + info->ndcb0 & NDCB0_LEN_OVRD)
> > + nand_writel(info, NDCB0,
> > + info->chunk_size + info->oob_size);
> > +
>
> Why don't you reuse the following if statement (which is doing the
> exact same thing, except for the size being stored in ndbc3 when
> the command is created).

I'll update to reuse this!

> Moreover, I'm pretty sure you don't want to add oob_size on the 2nd
> chunk, but only on the last one.
> Doing that will only work for 4K pages (2 * max_chunk_size), and you
> add support for 8K pages NANDs in this patch.

Yep. As a matter of fact, oob_size was equl to 0 in this case because of
some dirty hacks. I'll remove them and will send a v2 with a proper
solution.

> >
> > + if (info->variant == PXA3XX_NAND_VARIANT_BERLIN2)
> > + chip->cmdfunc = nand_cmdfunc_berlin;
>
> Your cmdfunc looks like the nand_cmdfunc_extended one, and this one is
> only used for NAND chips that have writesize > PAGE_CHUNK_SIZE.
>
> Is your cmdfunc supporting accesses to NAND chips with smaller pages ?
> If you're unsure, maybe you should add a check here, and refuse to
> probe such NAND chips.

I currently have no idea, so I'll add a check here.

> >
> > - num = ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1;
> > - for (i = 0; i < num; i++) {
> > - if (i < pdata->num_flash)
> > - f = pdata->flash + i;
> > - else
> > - f = &builtin_flash_types[i - pdata->num_flash + 1];
> > + if (info->variant == PXA3XX_NAND_VARIANT_BERLIN2)
> > + flash_types = berlin_builtin_flash_types;
> > + else
> > + flash_types = builtin_flash_types;
> >
> > - /* find the chip in default list */
> > + for (i = 0; (f = &flash_types[i]); i++)
> > if (f->chip_id == id)
> > break;
> > +
> > + if (f == NULL) {
> > + for (i = 0; i < pdata->num_flash; i++) {
> > + f = pdata->flash + i;
> > + if (f->chip_id == id)
> > + break;
> > + }
> > }
>
> You're changing the matching order here, the initial order was:
>
> 1/ pdata definition
> 2/ builtin types
>
> and you're now doing:
>
> 1/ builtin types
> 2/ pdata definition

Oops...

Thanks for the review!

Antoine

--
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2015-02-11 17:41    [W:0.156 / U:6.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site