lkml.org 
[lkml]   [2015]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 00/11] Improvements to Tegra-based Chromebook support
Date
v4:	* Added support for the system reset GPIO, for proper reboots
* Moved out changes to ASOC to their own series, as requested by Mark
Brown
* Added patch to reset the SOR, to make sure it's in a known state
* Changed nvidia,model property of the sound nodes to GoogleNyanBig
and GoogleNyanBlaze so they can be told apart in userspace

v3: * Added bindings for the LTN140AT29 panel
* Removed the delay in pwrseq, as what was actually needed was to add
a dependency on the power supplies of the host
* Uses the pinmux for the Blaze as generated by tegra-pinmux-scripts
* Uses the pinmux for the Big as in the last patch from Simon Glass

Hello,

this series adds support for the Tegra-based HP Chromebook 14 (aka nyan
blaze), which is very similar to the Acer Chromebook 13 (aka nyan big).
Because they both include tegra124-nyan.dtsi, some improvements to Blaze
support have also benefitted the Big. I have tested that USB2, the panels,
HDMI, the trackpad, Wifi and sound work on both.

The DT for the Big includes the pinmux configuration as generated by
tegra-pinmux-scripts with Simon's patch at:

https://patchwork.ozlabs.org/patch/417779/

These patches are based on top of linux-next 20150211.

http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=nyan-v4

Regards,

Tomeu

Andrew Bresticker (1):
ARM: tegra: add support for warm reset GPIO

Stéphane Marchesin (1):
drm/panel: add support for Samsung LTN140AT29 panel

Tomeu Vizoso (9):
ARM: tegra: Change model of sound card in Nyan Big
ARM: tegra: Move out nyan-generic parts out from the nyan-big DT
ARM: tegra: Add DTS for the nyan-blaze board
ARM: tegra: Add node for trackpad in Nyan boards
ARM: tegra: Use pwrseq-simple for the wifi in Nyan
ARM: tegra: Use the generated pinmux data
ARM: tegra: Set spi-max-frequency property to flash node
ARM: tegra: Set nvidia,reset-gpio property on the PMC node
drm/tegra: Reset the SOR on probe

.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 1 +
.../bindings/panel/samsung,ltn140at29-301.txt | 7 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/tegra124-nyan-big.dts | 2119 +++++++++++---------
arch/arm/boot/dts/tegra124-nyan-blaze.dts | 1332 ++++++++++++
arch/arm/boot/dts/tegra124-nyan.dtsi | 689 +++++++
drivers/gpu/drm/panel/panel-simple.c | 26 +
drivers/gpu/drm/tegra/sor.c | 14 +
drivers/soc/tegra/pmc.c | 33 +
9 files changed, 3261 insertions(+), 961 deletions(-)
create mode 100644 Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt
create mode 100644 arch/arm/boot/dts/tegra124-nyan-blaze.dts
create mode 100644 arch/arm/boot/dts/tegra124-nyan.dtsi

--
1.9.3



\
 
 \ /
  Last update: 2015-02-11 16:21    [W:0.105 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site