lkml.org 
[lkml]   [2015]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Video option for a big endian machine?
From
On Wed, Feb 11, 2015 at 3:53 AM,  <lausgans@gmail.com> wrote:
> Hello.
>
> I'm looking for a PCI or AGP video card that would work on a Linux port for a big endian architecture (HP PA-RISC). Unfortunately the stock video options (ATI FireGL X1 and X3) give an incredibly slow unaccelerated 2D due to failure to kickstart the command processor (radeon open source driver). Neither folks from linux-parisc@ nor from dri-devel@ camps know how to fix this.
>

The X1 and X3 are really old asics and the risc specific versions
tended to have special firmware for that platform that the open driver
does not handle properly. You might have better luck using a more
modern GPU (e.g., an R5xx or newer based asic) with an x86 vbios.


Alex

> Are there any other options that should get a good accelerated 2D or better 3D and theoretically should work on a subj (big endian byte order, looks like coherent memory and all I/O is going through IOMMU chip)?
>
> How about nouveau or anything else on non-x86 arch? What people are using on POWER machines for example?
>
> Thanks much for any help!
> _______________________________________________
> xorg@lists.x.org: X.Org support
> Archives: http://lists.freedesktop.org/archives/xorg
> Info: http://lists.x.org/mailman/listinfo/xorg
> Your subscription address: %(user_address)s


\
 
 \ /
  Last update: 2015-02-11 16:21    [W:0.098 / U:7.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site