lkml.org 
[lkml]   [2015]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 1e918876 breaks r8169 (linux-3.18+)
Hi,

> > > Since linux-3.18.0, r8169 is having problems driving one of my add-on
> > > PCIe NICs. The interface is losing link for several seconds at a time,
> > > the frequency being about once a minute when the traffic is high.
> > >
> > > The first loss of link is accompanied by the message "NETDEV WATCHDOG:
> > > eth1 (r8169): transmit queue 0 timed out" and a call trace, while
> > > subsequent occurrences only report "r8169 0000:01:00.0 eth1: link up"
> > > (w/o the complementary "link down" message).
> > >
> > > I've traced the culprit down to commit 1e918876, "r8169: add support
> > > for Byte Queue Limits" by Florian Westphal <fw@strlen.de>. Reverting
> > > the patch appears to fix the problem on linux-3.18.5.
> > > The same issue might already have been reported by Marco Berizzi here:
> > > http://lkml.org/lkml/2014/12/11/65
> >
> > Thanks for reporting this! I'm no lkml subscriber and thus did not
> > see earlier report.
> >
> > I'll try to reproduce this but unfortunately I am currently travelling
> > and won't have access to my r8169 nic until Feb 10th.
>
> I tried to reproduce this without success so far on my RTL8168d/8111d device.

I was afraid it might come to this. Of all the ~15 r8169 interfaces (mostly
onboard) I've got running in about 10 machines, only a single one is affected.

> I've been running 40 parallel netperf TCP_STREAM tests (1gbit) for the
> last 5 hours and so far I saw no watchdog tx timeouts.
>
> I'll keep this running for a day or so to see if it just takes more time
> to trigger.

Ok, but if the bug were to manifest itself in the same manner as it does
over here, it wouldn't require so much pressure.

> Do you use any "special" settings (e.g. offload features off, mtu > 1500, etc)?

Nothing special.

modprobe r8169
nameif eth1 xx:xx:xx:xx:xx:xx
ip link set eth1 up
ip addr add 192.168.x.y/24 brd + dev eth1
And that's it, really.

Seeya,
--
Tomáš Szépe <szepe@pinerecords.com>


\
 
 \ /
  Last update: 2015-02-11 11:01    [W:0.093 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site