lkml.org 
[lkml]   [2015]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] i2c: designware: fixup return handling of wait_for_completion_timeout
Date
return type of wait_for_completion_timeout is unsigned long not int, rather
than introducing a new variable the wait_for_completion_timeout is moved
into the if condition as the return value is only used to detect timeout.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
---

v2: Aside from the newly added variable having the wrong type (...) the
preferred solution is to simply wrap wait_for_completion_timeout into
the condition as the remaining jiffies is actually not used - suggested
be Jarkko Nikula <jarkko.nikula@linux.intel.com.

Patch was compile tested with x86_64_defconfig +
CONFIG_X86_AMD_PLATFORM_DEVICE=y, CONFIG_I2C_DESIGNWARE_PLATFORM=m
(implies CONFIG_I2C_DESIGNWARE_CORE=y)

Patch is against 3.19.0-rc7 (localversion-next is -next-20150209)

drivers/i2c/busses/i2c-designware-core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 6e25c01..6f19a33 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -656,8 +656,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
i2c_dw_xfer_init(dev);

/* wait for tx to complete */
- ret = wait_for_completion_timeout(&dev->cmd_complete, HZ);
- if (ret == 0) {
+ if (!wait_for_completion_timeout(&dev->cmd_complete, HZ)) {
dev_err(dev->dev, "controller timed out\n");
/* i2c_dw_init implicitly disables the adapter */
i2c_dw_init(dev);
--
1.7.10.4


\
 
 \ /
  Last update: 2015-02-10 09:21    [W:0.041 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site