lkml.org 
[lkml]   [2015]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i2c: at91: fixup return type of wait_for_completion_timeout
On Sun, Feb 08, 2015 at 11:12:07AM -0500, Nicholas Mc Guire wrote:
> Return type of wait_for_completion_timeout is unsigned long not int. This
> patch adds a timeout variable of appropriate type and fixes up the assignment.
>
> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>

Thanks

> ---
>
> Patch was only compile tested with at91_dt_defconfig
> (implies CONFIG_I2C_AT91=y)
>
> Patch is against 3.19.0-rc7 (localversion-next is -next-20150204)
>
> drivers/i2c/busses/i2c-at91.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
> index 636fd2e..79c6404 100644
> --- a/drivers/i2c/busses/i2c-at91.c
> +++ b/drivers/i2c/busses/i2c-at91.c
> @@ -381,6 +381,7 @@ static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
> static int at91_do_twi_transfer(struct at91_twi_dev *dev)
> {
> int ret;
> + unsigned long timeout;
> bool has_unre_flag = dev->pdata->has_unre_flag;
>
> dev_dbg(dev->dev, "transfer: %s %d bytes.\n",
> @@ -436,9 +437,9 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
> }
> }
>
> - ret = wait_for_completion_timeout(&dev->cmd_complete,
> - dev->adapter.timeout);
> - if (ret == 0) {
> + timeout = wait_for_completion_timeout(&dev->cmd_complete,
> + dev->adapter.timeout);
> + if (timeout == 0) {
> dev_err(dev->dev, "controller timed out\n");
> at91_init_twi_bus(dev);
> ret = -ETIMEDOUT;
> --
> 1.7.10.4
>


\
 
 \ /
  Last update: 2015-02-10 18:01    [W:0.045 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site