lkml.org 
[lkml]   [2015]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 00/19] PM / devferq: Add generic exynos bus frequency driver and new passive governor
Hi Anand,

First of all, thanks for trying to test this series.

On 2015년 12월 10일 04:05, Anand Moon wrote:
> Hi Chanwoo Choi,
>
> On 9 December 2015 at 09:37, Chanwoo Choi <cw00.choi@samsung.com> wrote:
>> This patch-set includes the two features as following. The generic exynos bus
>> frequency driver is able to support almost Exynos SoCs for bus frequency
>> scaling. And the new passive governor is able to make the dependency on
>> between devices for frequency/voltage scaling. I had posted the patch-set[1]
>> with the similiar concept. This is is revised version for exynos bus frequency.
>> - Generic exynos bus frequency driver
>> - New passive governor of DEVFREQ framework
>>
>> Depends on:
>> - This patch-set is based on devfreq.git[2].
>> [1] https://lkml.org/lkml/2015/1/7/872
>> : [PATCHv3 0/8] devfreq: Add generic exynos memory-bus frequency driver
>> [2] https://git.kernel.org/cgit/linux/kernel/git/mzx/devfreq.git/ (branch: for-rafael)
>>
>> Changes from v1:
>> (https://lkml.org/lkml/2015/11/26/260)
>> - Check whether the instance of regulator is NULL or not
>> when executing regulator_disable() because of only parent
>> devfreq device has the regulator instance. After fixing it,
>> the wake-up from suspend state is well working. (patch1)
>> - Fix bug which checks 'bus-clk' instead of 'bus->regulator'
>> after calling devm_clk_get() (on patch1)
>> - Update the documentation to remove the description about
>> DEVFREQ-EVENT subsystem (on patch2)
>> - Add the full name of DMC (Dynamic Memory Controller) (on patch2)
>> - Modify the detailed correlation of buses for Exynos3250
>> on documentation (patch2)
>> - Add the MFC bus node for Exynos3250 (on patch11, patch12)
>> - Fix the duplicate frequency of bus_display on Exynos4x12.dtsi
>> - Add the PPMU node for exynos4412-odroidu3
>> - Add the support of bus frequency for exynos4412-odroidu3
>>
>> Detailed descirption for patch-set:
>> 1. Add generic exynos bus frequency driver
>> : This patch-set adds the generic exynos bus frequency driver for AXI bus
>> of sub-blocks in exynos SoC. The Samsung Exynos SoC have the common
>> architecture for bus between DRAM and sub-blocks in SoC.
>>
>> There are the different buses according to Exynos SoC because Exynos SoC
>> has the differnt sub-blocks and bus speed. In spite of this difference
>> among Exynos SoCs, this driver is able to support almost Exynos SoC by adding
>> unique data of each bus in the devicetree file.
>>
>> In devicetree, each bus node has a bus clock, regulator, operation-point
>> and devfreq-event devices which measure the utilization of each bus block.
>>
>> For example,
>> - The bus of DMC block in exynos3250.dtsi are listed below:
>>
>> bus_dmc: bus_dmc {
>> compatible = "samsung,exynos-bus";
>> clocks = <&cmu_dmc CLK_DIV_DMC>;
>> clock-names = "bus";
>> operating-points-v2 = <&bus_dmc_opp_table>;
>> status = "disabled";
>> };
>>
>> bus_dmc_opp_table: opp_table0 {
>> compatible = "operating-points-v2";
>> opp-shared;
>>
>> opp00 {
>> opp-hz = /bits/ 64 <50000000>;
>> opp-microvolt = <800000>;
>> };
>> opp01 {
>> opp-hz = /bits/ 64 <100000000>;
>> opp-microvolt = <800000>;
>> };
>> opp02 {
>> opp-hz = /bits/ 64 <134000000>;
>> opp-microvolt = <800000>;
>> };
>> opp03 {
>> opp-hz = /bits/ 64 <200000000>;
>> opp-microvolt = <800000>;
>> };
>> opp04 {
>> opp-hz = /bits/ 64 <400000000>;
>> opp-microvolt = <875000>;
>> };
>> };
>>
>> - Usage case to handle the frequency and voltage of bus on runtime
>> in exynos3250-rinato.dts are listed below:
>>
>> &bus_dmc {
>> devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
>> vdd-supply = <&buck1_reg>; /* VDD_MIF */
>> status = "okay";
>> };
>>
>> 2. Add new passive governor of DEVFREQ framework (patch5-patch7)
>> : This patch-set add the new passive governor for DEVFREQ framework.
>> The existing governors (ondemand, performance and so on) are used for DVFS
>> (Dynamic Voltage and Frequency Scaling) drivers. The existing governors
>> are independently used for specific device driver which don't give the
>> influence to other device drviers and also don't receive the effect from
>> other device drivers.
>>
>> The passive governor depends on operation of parent driver with existing
>> governors(ondemand, performance and so on) extremely and is not able to
>> decide the new frequency by oneself. According to the decided new frequency
>> of parent driver with governor, the passive governor uses it to decide
>> the appropriate frequency for own device driver. The passive governor
>> must need the following information from device tree:
>>
>> For exameple,
>> There are one more bus device drivers in Exynos3250 which need to
>> change their source clock according to their utilization on runtime.
>> But, they share the same power line (e.g., regulator). So, LEFTBUS bus
>> driver is operated as parent with ondemand governor and then the rest
>> device driver with passive governor.
>>
>> The buses of Internal block in exynos3250.dtsi are listed below:
>> When LEFTBUS bus driver (parent) changes the bus frequency with
>> ondemand governor on runtime, the rest bus devices which sharing
>> the same power line (VDD_INT) will change the each bus frequency
>> according to the decision of LEFTBUS bus driver (parent).
>>
>> - INT (Internal) block
>> : VDD_INT |--- LEFTBUS
>> |--- PERIL
>> |--- MFC
>> |--- G3D
>> |--- RIGHTBUS
>> |--- FSYS
>> |--- LCD0
>> |--- PERIR
>> |--- ISP
>> |--- CAM
>>
>> - The buss of INT block in exynos3250.dtsi are listed below:
>> bus_leftbus: bus_leftbus {
>> compatible = "samsung,exynos-bus";
>> clocks = <&cmu CLK_DIV_GDL>;
>> clock-names = "bus";
>> operating-points-v2 = <&bus_leftbus_opp_table>;
>> status = "disabled";
>> };
>>
>> bus_rightbus: bus_rightbus {
>> compatible = "samsung,exynos-bus";
>> clocks = <&cmu CLK_DIV_GDR>;
>> clock-names = "bus";
>> operating-points-v2 = <&bus_leftbus_opp_table>;
>> status = "disabled";
>> };
>>
>> (Omit the rest bus dt node)
>>
>> - Usage case to handle the frequency and voltage of bus on runtime
>> in exynos3250-rinato.dts are listed below:
>> /* Parent bus device of VDD_INT */
>> &bus_leftbus {
>> devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
>> vdd-supply = <&buck3_reg>;
>> status = "okay";
>> };
>>
>> /* Passive bus device depend on LEFTBUS bus. */
>> &bus_rightbus {
>> devfreq = <&bus_leftbus>; /* 'devfreq' property indicates
>> the phandle of parent device. */
>> status = "okay";
>> };
>>
>> (Omit the rest bus dt node)
>>
>> Chanwoo Choi (19):
>> PM / devfreq: exynos: Add generic exynos bus frequency driver
>> PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver
>> ARM: dts: Add DMC bus node for Exynos3250
>> ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk
>> PM / devfreq: Add new passive governor
>> PM / devfreq: Add devfreq_get_devfreq_by_phandle()
>> PM / devfreq: Show the related information according to governor type
>> PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor
>> PM / devfreq: exynos: Update documentation for bus devices using passive governor
>> PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line
>> PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver
>> ARM: dts: Add bus nodes using VDD_INT for Exynos3250
>> ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12
>> ARM: dts: Add bus nodes using VDD_INT for Exynos4x12
>> ARM: dts: Add bus nodes using VDD_MIF for Exynos4210
>> ARM: dts: Add PPMU node for exynos4412-odroidu3
>> ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato
>> ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3
>> ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3
>>
>> .../devicetree/bindings/devfreq/exynos-bus.txt | 383 +++++++
>> arch/arm/boot/dts/exynos3250-monk.dts | 6 +
>> arch/arm/boot/dts/exynos3250-rinato.dts | 47 +
>> arch/arm/boot/dts/exynos3250.dtsi | 194 ++++
>> arch/arm/boot/dts/exynos4210.dtsi | 172 ++++
>> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 93 +-
>> arch/arm/boot/dts/exynos4412-trats2.dts | 47 +
>> arch/arm/boot/dts/exynos4x12.dtsi | 184 ++++
>> drivers/devfreq/Kconfig | 37 +-
>> drivers/devfreq/Makefile | 2 +
>> drivers/devfreq/devfreq.c | 120 ++-
>> drivers/devfreq/exynos/Makefile | 3 +-
>> drivers/devfreq/exynos/exynos-bus.c | 549 ++++++++++
>> drivers/devfreq/exynos/exynos4_bus.c | 1055 --------------------
>> drivers/devfreq/exynos/exynos4_bus.h | 110 --
>> drivers/devfreq/exynos/exynos5_bus.c | 431 --------
>> drivers/devfreq/exynos/exynos_ppmu.c | 119 ---
>> drivers/devfreq/exynos/exynos_ppmu.h | 86 --
>> drivers/devfreq/governor.h | 7 +
>> drivers/devfreq/governor_passive.c | 109 ++
>> drivers/devfreq/governor_performance.c | 1 +
>> drivers/devfreq/governor_powersave.c | 1 +
>> drivers/devfreq/governor_simpleondemand.c | 1 +
>> drivers/devfreq/governor_userspace.c | 1 +
>> include/linux/devfreq.h | 28 +
>> 25 files changed, 1958 insertions(+), 1828 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/devfreq/exynos-bus.txt
>> create mode 100644 drivers/devfreq/exynos/exynos-bus.c
>> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.c
>> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.h
>> delete mode 100644 drivers/devfreq/exynos/exynos5_bus.c
>> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.c
>> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.h
>> create mode 100644 drivers/devfreq/governor_passive.c
>>
>> --
>> 1.9.1
>>
>
> I could not get this series to work with my Odroid U3.
>
> [ 4.602768] input: gpio_keys as /devices/platform/gpio_keys/input/input0
> [ 4.605527] devfreq bus_leftbus: Couldn't update frequency
> transition information.
> [ 4.607319] devfreq bus_dmc: Couldn't update frequency transition
> information.
> [ 4.625096] usb 1-3: New USB device found, idVendor=0424, idProduct=3503

This log indicates the problem of 'trats_stat' sysfs entry of devfreq framework
during kernel booting. But, this log don't affect the behavior of bus frequency
on Odroid-U3.

After completing kernel and platform booting, you can check the operation
of Bus frequency with follwoing sysfs entry:

root@localhost:~# ls -al /sys/class/devfreq
total 0
drwxr-xr-x 2 root root 0 Dec 31 17:00 .
drwxr-xr-x 44 root root 0 Dec 31 17:00 ..
lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_acp -> ../../devices/platform/bus_acp/devfreq/bus_acp
lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_c2c -> ../../devices/platform/bus_c2c/devfreq/bus_c2c
lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_display -> ../../devices/platform/bus_display/devfreq/bus_display
lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_dmc -> ../../devices/platform/bus_dmc/devfreq/bus_dmc
lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_fsys -> ../../devices/platform/bus_fsys/devfreq/bus_fsys
lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_leftbus -> ../../devices/platform/bus_leftbus/devfreq/bus_leftbus
lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_mfc -> ../../devices/platform/bus_mfc/devfreq/bus_mfc
lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_peri -> ../../devices/platform/bus_peri/devfreq/bus_peri
lrwxrwxrwx 1 root root 0 Dec 31 17:00 bus_rightbus -> ../../devices/platform/bus_rightbus/devfreq/bus_rightbus

root@localhost:~# cat /sys/class/devfreq/bus_leftbus/trans_stat
From : To
: 100000000 134000000 160000000 200000000 time(ms)
100000000: 0 0 0 24 2020
134000000: 0 0 0 10 1190
160000000: 0 0 0 0 0
* 200000000: 24 10 0 0 118160
Total transition : 68

Also, when changing the frequency of each bus, exynos-bus.c show
the debug message. If you need more detailed information,
you could check this log message.

Regards,
Chanwoo Choi


\
 
 \ /
  Last update: 2015-12-10 01:21    [W:0.164 / U:1.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site