lkml.org 
[lkml]   [2015]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 09/19] PM / devfreq: exynos: Update documentation for bus devices using passive governor
From
Date
On 09.12.2015 13:08, Chanwoo Choi wrote:
> This patch updates the documentation for passive bus devices and adds the
> detailed example of Exynos3250.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> .../devicetree/bindings/devfreq/exynos-bus.txt | 244 ++++++++++++++++++++-
> 1 file changed, 241 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> index 54a1f9c46c88..c4fdc70f8eac 100644
> --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> @@ -13,18 +13,23 @@ SoC has the different sub-blocks. So, this difference should be specified
> in devicetree file instead of each device driver. In result, this driver
> is able to support the bus frequency for all Exynos SoCs.
>
> -Required properties for bus device:
> +Required properties for all bus devices:
> - compatible: Should be "samsung,exynos-bus".
> - clock-names : the name of clock used by the bus, "bus".
> - clocks : phandles for clock specified in "clock-names" property.
> - #clock-cells: should be 1.
> - operating-points-v2: the OPP table including frequency/voltage information
> to support DVFS (Dynamic Voltage/Frequency Scaling) feature.
> +
> +Required properties for only parent bus device:

Maybe:
"Required properties only for parent bus devices:"

In this binding documentation file the idea of "parent" is not
explained. I now it is related to passive devfreq governor but looking
at the binding itself it is a new idea, not covered here.

> - vdd-supply: the regulator to provide the buses with the voltage.
> - devfreq-events: the devfreq-event device to monitor the curret utilization
> of buses.
>
> -Optional properties for bus device:
> +Required properties for only passive bus device:

"Required properties only for passive bus devices:"

> +- devfreq: the parent bus device.
> +
> +Optional properties for only parent bus device:
> - exynos,saturation-ratio: the percentage value which is used to calibrate
> the performance count againt total cycle count.
>
> @@ -33,7 +38,20 @@ Example1:
> power line (regulator). The MIF (Memory Interface) AXI bus is used to
> transfer data between DRAM and CPU and uses the VDD_MIF regualtor.
>
> - - power line(VDD_MIF) --> bus for DMC (Dynamic Memory Controller) block
> + - MIF (Memory Interface) block
> + : VDD_MIF |--- DMC (Dynamic Memory Controller)
> +
> + - INT (Internal) block
> + : VDD_INT |--- LEFTBUS (parent device)
> + |--- PERIL
> + |--- MFC
> + |--- G3D
> + |--- RIGHTBUS
> + |--- FSYS
> + |--- LCD0
> + |--- PERIR
> + |--- ISP
> + |--- CAM
>
> - MIF bus's frequency/voltage table
> -----------------------
> @@ -46,6 +64,24 @@ Example1:
> |L5| 400000 |875000 |
> -----------------------
>
> + - INT bus's frequency/voltage table
> + ----------------------------------------------------------
> + |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT |
> + | name| |LCD0 | | | || |
> + | | |FSYS | | | || |
> + | | |MFC | | | || |
> + ----------------------------------------------------------
> + |Mode |*parent|passive |passive|passive|passive|| |
> + ----------------------------------------------------------
> + |Lv |Frequency ||Voltage |
> + ----------------------------------------------------------
> + |L1 |50000 |50000 |50000 |50000 |50000 ||900000 |
> + |L2 |80000 |80000 |80000 |80000 |80000 ||900000 |
> + |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 |
> + |L4 |134000 |134000 |200000 |200000 | ||1000000 |
> + |L5 |200000 |200000 |400000 |300000 | ||1000000 |
> + ----------------------------------------------------------
> +
> Example2 :
> The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi
> are listed below:
> @@ -84,6 +120,167 @@ Example2 :
> };
> };
>
> + bus_leftbus: bus_leftbus {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_GDL>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_rightbus: bus_rightbus {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_GDR>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_lcd0: bus_lcd0 {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_ACLK_160>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_fsys: bus_fsys {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_ACLK_200>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_leftbus_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_mcuisp: bus_mcuisp {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_mcuisp_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_isp: bus_isp {
> + compatible = "samsung,exynos-bus";
> + clocks = <&cmu CLK_DIV_ACLK_266>;
> + clock-names = "bus";
> + operating-points-v2 = <&bus_isp_opp_table>;
> + status = "disabled";
> + };
> +
> + bus_peril: bus_perir {


Peril or perir?

Best regards,
Krzysztof



\
 
 \ /
  Last update: 2015-12-10 03:01    [W:0.192 / U:4.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site