lkml.org 
[lkml]   [2015]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectApplied "regulator: pv88090: new regulator driver" to the regulator tree
The patch

regulator: pv88090: new regulator driver

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From c90456e36d9c89de0b6e9c8f21003208e0ad7f13 Mon Sep 17 00:00:00 2001
From: James Ban <James.Ban.opensource@diasemi.com>
Date: Tue, 8 Dec 2015 10:57:29 +0900
Subject: [PATCH] regulator: pv88090: new regulator driver

This is the driver for the Powerventure PV88090 BUCKs and LDOs regulator.
It communicates via an I2C bus to the device.

Signed-off-by: James Ban <James.Ban.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/regulator/pv88090.txt | 65 +++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pv88090-regulator.c | 458 +++++++++++++++++++++
drivers/regulator/pv88090-regulator.h | 98 +++++
5 files changed, 630 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/pv88090.txt
create mode 100644 drivers/regulator/pv88090-regulator.c
create mode 100644 drivers/regulator/pv88090-regulator.h

diff --git a/Documentation/devicetree/bindings/regulator/pv88090.txt b/Documentation/devicetree/bindings/regulator/pv88090.txt
new file mode 100644
index 000000000000..e52b2a95cdde
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pv88090.txt
@@ -0,0 +1,65 @@
+* Powerventure Semiconductor PV88090 Voltage Regulator
+
+Required properties:
+- compatible: "pvs,pv88090".
+- reg: I2C slave address, usually 0x48.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+ BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example
+
+ pmic: pv88090@48 {
+ compatible = "pvs,pv88090";
+ reg = <0x48>;
+ interrupt-parent = <&gpio>;
+ interrupts = <24 24>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-min-microamp = < 220000>;
+ regulator-max-microamp = <7040000>;
+ regulator-boot-on;
+ };
+
+ BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-min-microamp = <1496000>;
+ regulator-max-microamp = <4189000>;
+ };
+
+ BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-min-microamp = <1496000>;
+ regulator-max-microamp = <4189000>;
+ regulator-boot-on;
+ };
+
+ LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <4350000>;
+ regulator-boot-on;
+ };
+
+ LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = < 650000>;
+ regulator-max-microvolt = <2225000>;
+ regulator-boot-on;
+ };
+ };
+ };
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c61f72ff1dfd..5433c448aff2 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -512,6 +512,14 @@ config REGULATOR_PV88060
Say y here to support the voltage regulators and convertors
PV88060

+config REGULATOR_PV88090
+ tristate "Powerventure Semiconductor PV88090 regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say y here to support the voltage regulators and convertors
+ on PV88090
+
config REGULATOR_PWM
tristate "PWM voltage regulator"
depends on PWM
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b11c8a4f873a..29cda9d53787 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
+obj-$(CONFIG_REGULATOR_PV88090) += pv88090-regulator.o
obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c
new file mode 100644
index 000000000000..3ec5f2bdfc51
--- /dev/null
+++ b/drivers/regulator/pv88090-regulator.c
@@ -0,0 +1,458 @@
+/*
+ * pv88090-regulator.c - Regulator device driver for PV88090
+ * Copyright (C) 2015 Powerventure Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include "pv88090-regulator.h"
+
+#define PV88090_MAX_REGULATORS 5
+
+/* PV88090 REGULATOR IDs */
+enum {
+ /* BUCKs */
+ PV88090_ID_BUCK1,
+ PV88090_ID_BUCK2,
+ PV88090_ID_BUCK3,
+
+ /* LDOs */
+ PV88090_ID_LDO1,
+ PV88090_ID_LDO2,
+};
+
+struct pv88090_regulator {
+ struct regulator_desc desc;
+ /* Current limiting */
+ unsigned n_current_limits;
+ const int *current_limits;
+ unsigned int limit_mask;
+ unsigned int conf;
+ unsigned int conf2;
+};
+
+struct pv88090 {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regulator_dev *rdev[PV88090_MAX_REGULATORS];
+};
+
+struct pv88090_buck_voltage {
+ int min_uV;
+ int max_uV;
+ int uV_step;
+};
+
+static const struct regmap_config pv88090_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+/* Current limits array (in uA) for BUCK1, BUCK2, BUCK3.
+ * Entry indexes corresponds to register values.
+ */
+
+static const int pv88090_buck1_limits[] = {
+ 220000, 440000, 660000, 880000, 1100000, 1320000, 1540000, 1760000,
+ 1980000, 2200000, 2420000, 2640000, 2860000, 3080000, 3300000, 3520000,
+ 3740000, 3960000, 4180000, 4400000, 4620000, 4840000, 5060000, 5280000,
+ 5500000, 5720000, 5940000, 6160000, 6380000, 6600000, 6820000, 7040000
+};
+
+static const int pv88090_buck23_limits[] = {
+ 1496000, 2393000, 3291000, 4189000
+};
+
+static const struct pv88090_buck_voltage pv88090_buck_vol[3] = {
+ {
+ .min_uV = 600000,
+ .max_uV = 1393750,
+ .uV_step = 6250,
+ },
+
+ {
+ .min_uV = 1400000,
+ .max_uV = 2193750,
+ .uV_step = 6250,
+ },
+ {
+ .min_uV = 1250000,
+ .max_uV = 2837500,
+ .uV_step = 12500,
+ },
+};
+
+static unsigned int pv88090_buck_get_mode(struct regulator_dev *rdev)
+{
+ struct pv88090_regulator *info = rdev_get_drvdata(rdev);
+ unsigned int data;
+ int ret, mode = 0;
+
+ ret = regmap_read(rdev->regmap, info->conf, &data);
+ if (ret < 0)
+ return ret;
+
+ switch (data & PV88090_BUCK1_MODE_MASK) {
+ case PV88090_BUCK_MODE_SYNC:
+ mode = REGULATOR_MODE_FAST;
+ break;
+ case PV88090_BUCK_MODE_AUTO:
+ mode = REGULATOR_MODE_NORMAL;
+ break;
+ case PV88090_BUCK_MODE_SLEEP:
+ mode = REGULATOR_MODE_STANDBY;
+ break;
+ }
+
+ return mode;
+}
+
+static int pv88090_buck_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct pv88090_regulator *info = rdev_get_drvdata(rdev);
+ int val = 0;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = PV88090_BUCK_MODE_SYNC;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = PV88090_BUCK_MODE_AUTO;
+ break;
+ case REGULATOR_MODE_STANDBY:
+ val = PV88090_BUCK_MODE_SLEEP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(rdev->regmap, info->conf,
+ PV88090_BUCK1_MODE_MASK, val);
+}
+
+static int pv88090_set_current_limit(struct regulator_dev *rdev, int min,
+ int max)
+{
+ struct pv88090_regulator *info = rdev_get_drvdata(rdev);
+ int i;
+
+ /* search for closest to maximum */
+ for (i = info->n_current_limits; i >= 0; i--) {
+ if (min <= info->current_limits[i]
+ && max >= info->current_limits[i]) {
+ return regmap_update_bits(rdev->regmap,
+ info->conf,
+ info->limit_mask,
+ i << PV88090_BUCK1_ILIM_SHIFT);
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int pv88090_get_current_limit(struct regulator_dev *rdev)
+{
+ struct pv88090_regulator *info = rdev_get_drvdata(rdev);
+ unsigned int data;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, info->conf, &data);
+ if (ret < 0)
+ return ret;
+
+ data = (data & info->limit_mask) >> PV88090_BUCK1_ILIM_SHIFT;
+ return info->current_limits[data];
+}
+
+static struct regulator_ops pv88090_buck_ops = {
+ .get_mode = pv88090_buck_get_mode,
+ .set_mode = pv88090_buck_set_mode,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_current_limit = pv88090_set_current_limit,
+ .get_current_limit = pv88090_get_current_limit,
+};
+
+static struct regulator_ops pv88090_ldo_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+#define PV88090_BUCK(chip, regl_name, min, step, max, limits_array) \
+{\
+ .desc = {\
+ .id = chip##_ID_##regl_name,\
+ .name = __stringify(chip##_##regl_name),\
+ .of_match = of_match_ptr(#regl_name),\
+ .regulators_node = of_match_ptr("regulators"),\
+ .type = REGULATOR_VOLTAGE,\
+ .owner = THIS_MODULE,\
+ .ops = &pv88090_buck_ops,\
+ .min_uV = min, \
+ .uV_step = step, \
+ .n_voltages = ((max) - (min))/(step) + 1, \
+ .enable_reg = PV88090_REG_##regl_name##_CONF0, \
+ .enable_mask = PV88090_##regl_name##_EN, \
+ .vsel_reg = PV88090_REG_##regl_name##_CONF0, \
+ .vsel_mask = PV88090_V##regl_name##_MASK, \
+ },\
+ .current_limits = limits_array, \
+ .n_current_limits = ARRAY_SIZE(limits_array), \
+ .limit_mask = PV88090_##regl_name##_ILIM_MASK, \
+ .conf = PV88090_REG_##regl_name##_CONF1, \
+ .conf2 = PV88090_REG_##regl_name##_CONF2, \
+}
+
+#define PV88090_LDO(chip, regl_name, min, step, max) \
+{\
+ .desc = {\
+ .id = chip##_ID_##regl_name,\
+ .name = __stringify(chip##_##regl_name),\
+ .of_match = of_match_ptr(#regl_name),\
+ .regulators_node = of_match_ptr("regulators"),\
+ .type = REGULATOR_VOLTAGE,\
+ .owner = THIS_MODULE,\
+ .ops = &pv88090_ldo_ops,\
+ .min_uV = min, \
+ .uV_step = step, \
+ .n_voltages = ((max) - (min))/(step) + 1, \
+ .enable_reg = PV88090_REG_##regl_name##_CONT, \
+ .enable_mask = PV88090_##regl_name##_EN, \
+ .vsel_reg = PV88090_REG_##regl_name##_CONT, \
+ .vsel_mask = PV88090_V##regl_name##_MASK, \
+ },\
+}
+
+static struct pv88090_regulator pv88090_regulator_info[] = {
+ PV88090_BUCK(PV88090, BUCK1, 600000, 6250, 1393750,
+ pv88090_buck1_limits),
+ PV88090_BUCK(PV88090, BUCK2, 600000, 6250, 1393750,
+ pv88090_buck23_limits),
+ PV88090_BUCK(PV88090, BUCK3, 600000, 6250, 1393750,
+ pv88090_buck23_limits),
+ PV88090_LDO(PV88090, LDO1, 1200000, 50000, 4350000),
+ PV88090_LDO(PV88090, LDO2, 650000, 25000, 2225000),
+};
+
+static irqreturn_t pv88090_irq_handler(int irq, void *data)
+{
+ struct pv88090 *chip = data;
+ int i, reg_val, err, ret = IRQ_NONE;
+
+ err = regmap_read(chip->regmap, PV88090_REG_EVENT_A, &reg_val);
+ if (err < 0)
+ goto error_i2c;
+
+ if (reg_val & PV88090_E_VDD_FLT) {
+ for (i = 0; i < PV88090_MAX_REGULATORS; i++) {
+ if (chip->rdev[i] != NULL) {
+ regulator_notifier_call_chain(chip->rdev[i],
+ REGULATOR_EVENT_UNDER_VOLTAGE,
+ NULL);
+ }
+ }
+
+ err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A,
+ PV88090_E_VDD_FLT, PV88090_E_VDD_FLT);
+ if (err < 0)
+ goto error_i2c;
+
+ ret = IRQ_HANDLED;
+ }
+
+ if (reg_val & PV88090_E_OVER_TEMP) {
+ for (i = 0; i < PV88090_MAX_REGULATORS; i++) {
+ if (chip->rdev[i] != NULL) {
+ regulator_notifier_call_chain(chip->rdev[i],
+ REGULATOR_EVENT_OVER_TEMP,
+ NULL);
+ }
+ }
+
+ err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A,
+ PV88090_E_OVER_TEMP, PV88090_E_OVER_TEMP);
+ if (err < 0)
+ goto error_i2c;
+
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+
+error_i2c:
+ dev_err(chip->dev, "I2C error : %d\n", err);
+ return IRQ_NONE;
+}
+
+/*
+ * I2C driver interface functions
+ */
+static int pv88090_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
+ struct pv88090 *chip;
+ struct regulator_config config = { };
+ int error, i, ret = 0;
+ unsigned int conf2, range, index;
+
+ chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88090), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->dev = &i2c->dev;
+ chip->regmap = devm_regmap_init_i2c(i2c, &pv88090_regmap_config);
+ if (IS_ERR(chip->regmap)) {
+ error = PTR_ERR(chip->regmap);
+ dev_err(chip->dev, "Failed to allocate register map: %d\n",
+ error);
+ return error;
+ }
+
+ i2c_set_clientdata(i2c, chip);
+
+ if (i2c->irq != 0) {
+ ret = regmap_write(chip->regmap, PV88090_REG_MASK_A, 0xFF);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Failed to mask A reg: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_write(chip->regmap, PV88090_REG_MASK_B, 0xFF);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Failed to mask B reg: %d\n", ret);
+ return ret;
+ }
+
+ ret = request_threaded_irq(i2c->irq, NULL,
+ pv88090_irq_handler,
+ IRQF_TRIGGER_LOW|IRQF_ONESHOT,
+ "pv88090", chip);
+ if (ret != 0) {
+ dev_err(chip->dev, "Failed to request IRQ: %d\n",
+ i2c->irq);
+ return ret;
+ }
+
+ ret = regmap_update_bits(chip->regmap, PV88090_REG_MASK_A,
+ PV88090_M_VDD_FLT | PV88090_M_OVER_TEMP, 0);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Failed to update mask reg: %d\n", ret);
+ return ret;
+ }
+
+ } else {
+ dev_warn(chip->dev, "No IRQ configured\n");
+ }
+
+ config.dev = chip->dev;
+ config.regmap = chip->regmap;
+
+ for (i = 0; i < PV88090_MAX_REGULATORS; i++) {
+ if (init_data)
+ config.init_data = &init_data[i];
+
+ if (i == PV88090_ID_BUCK2 || i == PV88090_ID_BUCK3) {
+ ret = regmap_read(chip->regmap,
+ pv88090_regulator_info[i].conf2, &conf2);
+ if (ret < 0)
+ return ret;
+
+ conf2 = ((conf2 >> PV88090_BUCK_VDAC_RANGE_SHIFT)
+ && PV88090_BUCK_VDAC_RANGE_MASK);
+
+ ret = regmap_read(chip->regmap,
+ PV88090_REG_BUCK_FOLD_RANGE, &range);
+ if (ret < 0)
+ return ret;
+
+ range = ((range
+ >> (PV88080_BUCK_VRANGE_GAIN_SHIFT + i - 1))
+ && PV88080_BUCK_VRANGE_GAIN_MASK);
+ index = ((range << 1) | conf2);
+
+ pv88090_regulator_info[i].desc.min_uV
+ = pv88090_buck_vol[index].min_uV;
+ pv88090_regulator_info[i].desc.uV_step
+ = pv88090_buck_vol[index].uV_step;
+ pv88090_regulator_info[i].desc.n_voltages
+ = ((pv88090_buck_vol[index].max_uV)
+ - (pv88090_buck_vol[index].min_uV))
+ /(pv88090_buck_vol[index].uV_step) + 1;
+ }
+
+ config.driver_data = (void *)&pv88090_regulator_info[i];
+ chip->rdev[i] = devm_regulator_register(chip->dev,
+ &pv88090_regulator_info[i].desc, &config);
+ if (IS_ERR(chip->rdev[i])) {
+ dev_err(chip->dev,
+ "Failed to register PV88090 regulator\n");
+ return PTR_ERR(chip->rdev[i]);
+ }
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id pv88090_i2c_id[] = {
+ {"pv88090", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, pv88090_i2c_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pv88090_dt_ids[] = {
+ { .compatible = "pvs,pv88090", .data = &pv88090_i2c_id[0] },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pv88090_dt_ids);
+#endif
+
+static struct i2c_driver pv88090_regulator_driver = {
+ .driver = {
+ .name = "pv88090",
+ .of_match_table = of_match_ptr(pv88090_dt_ids),
+ },
+ .probe = pv88090_i2c_probe,
+ .id_table = pv88090_i2c_id,
+};
+
+module_i2c_driver(pv88090_regulator_driver);
+
+MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
+MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88090");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/pv88090-regulator.h b/drivers/regulator/pv88090-regulator.h
new file mode 100644
index 000000000000..d7aca8d8266d
--- /dev/null
+++ b/drivers/regulator/pv88090-regulator.h
@@ -0,0 +1,98 @@
+/*
+ * pv88090-regulator.h - Regulator definitions for PV88090
+ * Copyright (C) 2015 Powerventure Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __PV88090_REGISTERS_H__
+#define __PV88090_REGISTERS_H__
+
+/* System Control and Event Registers */
+#define PV88090_REG_EVENT_A 0x03
+#define PV88090_REG_MASK_A 0x06
+#define PV88090_REG_MASK_B 0x07
+
+/* Regulator Registers */
+#define PV88090_REG_BUCK1_CONF0 0x18
+#define PV88090_REG_BUCK1_CONF1 0x19
+#define PV88090_REG_BUCK1_CONF2 0x1a
+#define PV88090_REG_BUCK2_CONF0 0x1b
+#define PV88090_REG_BUCK2_CONF1 0x1c
+#define PV88090_REG_BUCK2_CONF2 0x58
+#define PV88090_REG_BUCK3_CONF0 0x1d
+#define PV88090_REG_BUCK3_CONF1 0x1e
+#define PV88090_REG_BUCK3_CONF2 0x5c
+
+#define PV88090_REG_LDO1_CONT 0x1f
+#define PV88090_REG_LDO2_CONT 0x20
+#define PV88090_REG_LDO3_CONT 0x21
+#define PV88090_REG_BUCK_FOLD_RANGE 0x61
+
+/* PV88090_REG_EVENT_A (addr=0x03) */
+#define PV88090_E_VDD_FLT 0x01
+#define PV88090_E_OVER_TEMP 0x02
+
+/* PV88090_REG_MASK_A (addr=0x06) */
+#define PV88090_M_VDD_FLT 0x01
+#define PV88090_M_OVER_TEMP 0x02
+
+/* PV88090_REG_BUCK1_CONF0 (addr=0x18) */
+#define PV88090_BUCK1_EN 0x80
+#define PV88090_VBUCK1_MASK 0x7F
+/* PV88090_REG_BUCK2_CONF0 (addr=0x1b) */
+#define PV88090_BUCK2_EN 0x80
+#define PV88090_VBUCK2_MASK 0x7F
+/* PV88090_REG_BUCK3_CONF0 (addr=0x1d) */
+#define PV88090_BUCK3_EN 0x80
+#define PV88090_VBUCK3_MASK 0x7F
+/* PV88090_REG_LDO1_CONT (addr=0x1f) */
+#define PV88090_LDO1_EN 0x40
+#define PV88090_VLDO1_MASK 0x3F
+/* PV88090_REG_LDO2_CONT (addr=0x20) */
+#define PV88090_LDO2_EN 0x40
+#define PV88090_VLDO2_MASK 0x3F
+
+/* PV88090_REG_BUCK1_CONF1 (addr=0x19) */
+#define PV88090_BUCK1_ILIM_SHIFT 2
+#define PV88090_BUCK1_ILIM_MASK 0x7C
+#define PV88090_BUCK1_MODE_MASK 0x03
+
+/* PV88090_REG_BUCK2_CONF1 (addr=0x1c) */
+#define PV88090_BUCK2_ILIM_SHIFT 2
+#define PV88090_BUCK2_ILIM_MASK 0x0C
+#define PV88090_BUCK2_MODE_MASK 0x03
+
+/* PV88090_REG_BUCK3_CONF1 (addr=0x1e) */
+#define PV88090_BUCK3_ILIM_SHIFT 2
+#define PV88090_BUCK3_ILIM_MASK 0x0C
+#define PV88090_BUCK3_MODE_MASK 0x03
+
+#define PV88090_BUCK_MODE_SLEEP 0x00
+#define PV88090_BUCK_MODE_AUTO 0x01
+#define PV88090_BUCK_MODE_SYNC 0x02
+
+/* PV88090_REG_BUCK2_CONF2 (addr=0x58) */
+/* PV88090_REG_BUCK3_CONF2 (addr=0x5c) */
+#define PV88090_BUCK_VDAC_RANGE_SHIFT 7
+#define PV88090_BUCK_VDAC_RANGE_MASK 0x01
+
+#define PV88090_BUCK_VDAC_RANGE_1 0x00
+#define PV88090_BUCK_VDAC_RANGE_2 0x01
+
+/* PV88090_REG_BUCK_FOLD_RANGE (addr=0x61) */
+#define PV88080_BUCK_VRANGE_GAIN_SHIFT 3
+#define PV88080_BUCK_VRANGE_GAIN_MASK 0x01
+
+#define PV88080_BUCK_VRANGE_GAIN_1 0x00
+#define PV88080_BUCK_VRANGE_GAIN_2 0x01
+
+#endif /* __PV88090_REGISTERS_H__ */
--
2.6.2


\
 
 \ /
  Last update: 2015-12-08 20:21    [W:0.065 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site