lkml.org 
[lkml]   [2015]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/9] clk: hi3519: add dt-binding document and header file
From
Date


On 2015/12/7 17:36, Arnd Bergmann wrote:
> On Monday 07 December 2015 16:01:03 xuejiancheng wrote:
>> On 2015/12/4 18:56, Arnd Bergmann wrote:
>>> On Friday 04 December 2015 11:21:28 xuejiancheng wrote:
>>>> Hi Arnd,
>>>>
>>>> On 2015/12/3 17:44, Arnd Bergmann wrote:
>>>>> On Thursday 03 December 2015 10:39:24 Jiancheng Xue wrote:
>>>>>> +#ifndef __DTS_HI3519_CLOCK_H
>>>>>> +#define __DTS_HI3519_CLOCK_H
>>>>>
>>>>> Please try to avoid adding headers like this if you can at all.
>>>>>
>>>>> I might ask you to merge the header file in one merge window
>>>>> otherwise and submit the platform code one kernel later, as they
>>>>> tendn to cause us needless dependencies otherwise.
>>>>>
>>>>
>>>> Sorry. In v1, Rob suggested putting binding doc and header files in
>>>> a separate patch. The clock driver indeed depends on the header.
>>>>
>>>> I will put the header and the clock driver in a patch, and keep the
>>>> binding doc in another patch.
>>>
>>> Having split patches is better, I was really commenting on the fact
>>> that ideally you would not have a header file at all. If we merge
>>> the header through arm-soc, then you won't be able to merge the
>>> clk driver easily, and if you merge the header through the clk
>>> maintainer, I'm can't take your dts files.
>>
>> Thank you for your comments. Because the clocks in the crg module have
>> different types and random layouts. If this header file is removed,
>> the clock driver and the dts files will get very complicated.
>>
>> Could you help me acknowledge it if I put the header file and clock driver
>> in a patch?
>>
>> Could you give me some suggestions If I want to keep this header file?
>
> If this is another clock controller that has a random register layout,
> then adding the header file is the least problematic solution indeed.

Is it OK if I put the header file and the clock driver in a patch?

If it's not OK, could you tell me how should I separate the patches?

Thank you.

>
>>>>> Where do those numbers come from? They are not consecutive, so it sounds
>>>>> like they are directly from the data sheet and won't be needed in the driver.
>>>>> If that's true, just use the numbers directly, as you do for everything
>>>>> else.
>>>>
>>>> The numbers are defined by myself, not directly from the data sheet. Some numbers
>>>> are reserved for device nodes which will be added later. So they are not consecutive now.
>>>
>>> I don't understand. How do you decide which numbers to reserve? If the
>>> numbers are completely arbitrary and you have no idea what other clocks
>>> there are, you can simply have consecutive numbers here and do the driver
>>> accordingly.
>>
>> The clocks are divided into several groups according to their types. The clocks in
>> a group are expected to have consecutive numbers. So some numbers are reserved for
>> every group in this file, just like in some existing headers. Other clocks will be
>> added when other peripherals drivers are submitted. They will use the reserve numbers
>> and be inserted into existing groups.
>>
>> Of course it is not required to reserve numbers for later added clocks.
>
> Are you able to enumerate all the clocks then? If all clocks that are
> supported by this clock controllers have names in the data sheet, I
> would prefer to just list them all now rather than only enter the ones
> we already need, to avoid having future merge conflicts.
>
> Then we just need to add code to support those clocks when we need them,
> but that can be done in parallel to adding the DT nodes and the driver,
> rather than strongly serializing the patch flow on the header file patches.
>
> Arnd
>
> .
>



\
 
 \ /
  Last update: 2015-12-08 11:01    [W:0.286 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site