lkml.org 
[lkml]   [2015]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.3 023/125] ARM: dts: imx27.dtsi: change the clock information for usb
Date
4.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@freescale.com>

commit facf47ee6b4d07d43c3bfd6f0762f1b28f64703a upstream.

For imx27, it needs three clocks to let the controller work,
the old code is wrong, and usbmisc has not included clock handling
code any more. Without this patch, it will cause below data
abort when accessing usbmisc registers.

usbcore: registered new interface driver usb-storage
Unhandled fault: external abort on non-linefetch (0x008) at 0xf4424600
pgd = c0004000
[f4424600] *pgd=10000452(bad)
Internal error: : 8 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-next-20150701-dirty #3089
Hardware name: Freescale i.MX27 (Device Tree Support)
task: c7832b60 ti: c783e000 task.ti: c783e000
PC is at usbmisc_imx27_init+0x4c/0xbc
LR is at usbmisc_imx27_init+0x40/0xbc
pc : [<c03cb5c0>] lr : [<c03cb5b4>] psr: 60000093
sp : c783fe08 ip : 00000000 fp : 00000000
r10: c0576434 r9 : 0000009c r8 : c7a773a0
r7 : 01000000 r6 : 60000013 r5 : c7a776f0 r4 : c7a773f0
r3 : f4424600 r2 : 00000000 r1 : 00000001 r0 : 00000001
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005317f Table: a0004000 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc783e190)
Stack: (0xc783fe08 to 0xc7840000)

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm/boot/dts/imx27.dtsi | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)

--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -486,7 +486,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
@@ -495,7 +498,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
@@ -505,7 +511,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
@@ -515,7 +524,6 @@
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
- clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
};

sahara2: sahara@10025000 {



\
 
 \ /
  Last update: 2015-12-07 16:41    [W:0.327 / U:1.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site