lkml.org 
[lkml]   [2015]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v4] pci: Limit VPD length for megaraid_sas adapter
From
Date
Hi Bjorn,
My old logs were lost. So, I had to recreate the issue again. So it took sometime.

On 12/7/2015 11:29 AM, Bjorn Helgaas wrote:
> Hi Babu,
>
> On Thu, Dec 03, 2015 at 12:25:19PM -0800, Babu Moger wrote:
>> Reading or Writing of PCI VPD data causes system panic.
>> We saw this problem by running "lspci -vvv" in the beginning.
>> However this can be easily reproduced by running
>> cat /sys/bus/devices/XX../vpd
>
> What sort of panic is this?

Actual panic stack showed total different area. It looked like this.

TSTATE: 0000000080e01601 TPC: 00000000007945c8 TNPC: 00000000007945cc Y: 00000000 Not tainted
TPC: <ehci_irq+0x94/0x388>
g0: 0000000000004000 g1: 0000084001604020 g2: 0000084001604024 g3: 0000000000000acb
g4: ffff800fe42d0340 g5: ffff8000291ce000 g6: ffff800fe42f4000 g7: 0000031100004000
o0: ffff800fe085d99c o1: ffff800fe42f4008 o2: 0000000000004000 o3: 0000000000000001
o4: 0000000000000000 o5: 0000000000000012 sp: ffff80002047b2b1 ret_pc: 0000000000794540
RPC: <ehci_irq+0xc/0x388>
l0: ffff800fe085d980 l1: 000000000000c001 l2: 000000000000000b l3: 00000000008e7058
l4: 0000000000bd19a8 l5: 0000000000bd6a88 l6: 0000000000000000 l7: 0000000000000000
i0: ffff800fe085d800 i1: 0000000000000016 i2: 8000000c20c007c3 i3: 00000000f0265f78
i4: 00000000feff4748 i5: 00000000feff2ff8 i6: ffff80002047b3d1 i7: 000000000077adf0
I7: <usb_hcd_irq+0x38/0xa0>
Call Trace:
[000000000077adf0] usb_hcd_irq+0x38/0xa0
[00000000004d122c] handle_irq_event_percpu+0x8c/0x204
[00000000004d13d8] handle_irq_event+0x34/0x60
[00000000004d3998] handle_fasteoi_irq+0xdc/0x164
[00000000004d1178] generic_handle_irq+0x24/0x38
[00000000008dce68] handler_irq+0xb8/0xec
[00000000004208b4] tl0_irq5+0x14/0x20
[000000000042cfac] cpu_idle+0x9c/0x18c
[00000000008d2ad0] after_lock_tlb+0x1b4/0x1cc
[0000000000000000] (null)


While analyzing it from kdump, I saw it stuck in here below.

PID: 5274 TASK: ffff800fe1198680 CPU: 0 COMMAND: "cat"
#0 [ffff800fe25f6f81] switch_to_pc at 8d725c
#1 [ffff800fe25f70e1] pci_user_read_config_word at 6c4698
#2 [ffff800fe25f71a1] pci_vpd_pci22_wait at 6c4710
#3 [ffff800fe25f7261] pci_vpd_pci22_read at 6c4994
#4 [ffff800fe25f7321] pci_read_vpd at 6c3e90
#5 [ffff800fe25f73d1] read_vpd_attr at 6ccc78
#6 [ffff800fe25f7481] read at 5be478
#7 [ffff800fe25f7531] vfs_read at 54fdb0
#8 [ffff800fe25f75e1] sys_read at 54ff10
#9 [ffff800fe25f76a1] linux_sparc_syscall at 4060f4
TSTATE=0x8082000223 TT=0x16d TPC=0xfffffc0100295e28 TNPC=0xfffffc0100295e2c
r0=0x0000000000000000 r1=0x0000000000000003 r2=0x000000000020aec0
r3=0x000000000020aec4 r4=0x000000000b000000 r5=0x00000000033fffff
r6=0x0000000000000001 r7=0xfffffc01000006f0 r24=0x0000000000000003
r25=0x000000000020e000 r26=0x0000000000008000 r27=0x0000000000000000
r28=0x0000000000000000 r29=0x0000000000000000 r30=0x000007feffb468d1
r31=0x0000000000105d94



>
> This seems like a defect in the megaraid hardware or firmware. If the
> VPD ROM contains junk, there's no hope that software can read the data
> and figure out how much is safe to read.

Yes this looks like problem with megaraid hardware.

Other day, Myron stowe(myron.stowe@gmail.com) reported similar problem with
his setup.

$ lspci -vvv -s 02:00.0
02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2208
[Thunderbolt] (rev 05)
Capabilities: [d0] Vital Product Data
Unknown small resource type 00, will not decode more.

$ cat /sys/devices/pci0000:00/0000:00:02.2/0000:02:00.0/vpd |
od -A x -t x1z -v
000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >................<
*
007ff0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >................<
008000


>
> I assume VPD is useful for somebody, and I hate to silently disable
> the whole thing. We might want to at least log a note about what
> we're doing.

Sure. Let me know what you think.


>
> Bjorn
>
>> VPD length has been set as 32768 by default. Accessing vpd
>> will trigger read/write of 32k. This causes problem as we
>> could read data beyond the VPD end tag. Behaviour is un-
>> predictable when this happens. I see some other adapter doing
>> similar quirks(commit bffadffd43d4 ("PCI: fix VPD limit quirk
>> for Broadcom 5708S"))
>>
>> I see there is an attempt to fix this right way.
>> https://patchwork.ozlabs.org/patch/534843/ or
>> https://lkml.org/lkml/2015/10/23/97
>>
>> Tried to fix it this way, but problem is I dont see the proper
>> start/end TAGs(at least for this adapter) at all. The data is
>> mostly junk or zeros. This patch fixes the issue by setting the
>> vpd length to 0x80.
>>
>> Signed-off-by: Babu Moger <babu.moger@oracle.com>
>> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
>> Tested-by: Dmitry Klochkov <dmitry.klochkov@oracle.com>
>>
>> Orabug: 22104511
>>
>> Changes since v3 -> v4
>> We found some options of the lspci does not work very well if
>> it cannot find the valid vpd tag(Example command "lspci -s 10:00.0 -vv").
>> It displays the error message and exits right away. Setting the length
>> back to 0 fixes the problem.
>>
>> Changes since v2 -> v3
>> Changed the vpd length from 0 to 0x80 which leaves the
>> option open for someone to read first few bytes.
>>
>> Changes since v1 -> v2
>> Removed the changes in pci_id.h. Kept all the vendor
>> ids in quirks.c
>> ---
>> drivers/pci/quirks.c | 38 ++++++++++++++++++++++++++++++++++++++
>> 1 files changed, 38 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>> index b03373f..f739e47 100644
>> --- a/drivers/pci/quirks.c
>> +++ b/drivers/pci/quirks.c
>> @@ -2123,6 +2123,44 @@ static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
>> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
>>
>> /*
>> + * A read/write to sysfs entry ('/sys/bus/pci/devices/<id>/vpd')
>> + * will dump 32k of data. The default length is set as 32768.
>> + * Reading a full 32k will cause an access beyond the VPD end tag.
>> + * The system behaviour at that point is mostly unpredictable.
>> + * Also I dont believe vendors have implemented this VPD headers properly.
>> + * Atleast I dont see it in following megaraid sas controller.
>> + * That is why adding the quirk here.
>> + */
>> +static void quirk_megaraid_sas_limit_vpd(struct pci_dev *dev)
>> +{
>> + if (dev->vpd)
>> + dev->vpd->len = 0;
>> +}
>> +
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d,
>> + quirk_megaraid_sas_limit_vpd);
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f,
>> + quirk_megaraid_sas_limit_vpd);
>> +
>> +/*
>> * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
>> * VPD end tag will hang the device. This problem was initially
>> * observed when a vpd entry was created in sysfs
>> --
>> 1.7.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2015-12-08 00:41    [W:0.055 / U:1.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site