lkml.org 
[lkml]   [2015]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/23] mtd: use mtd_set_ecclayout() where appropriate
Date
Use the mtd_set_ecclayout() helper instead of directly assigning the
mtd->ecclayout field.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/devices/docg3.c | 2 +-
drivers/mtd/mtdconcat.c | 2 +-
drivers/mtd/mtdpart.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/onenand/onenand_base.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index e7b2e43..6b516e1 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1857,7 +1857,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
mtd->_read_oob = doc_read_oob;
mtd->_write_oob = doc_write_oob;
mtd->_block_isbad = doc_block_isbad;
- mtd->ecclayout = &docg3_oobinfo;
+ mtd_set_ecclayout(mtd, &docg3_oobinfo);
mtd->oobavail = 8;
mtd->ecc_strength = DOC_ECC_BCH_T;

diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 239a8c8..481565e 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -777,7 +777,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c

}

- concat->mtd.ecclayout = subdev[0]->ecclayout;
+ mtd_set_ecclayout(&concat->mtd, subdev[0]->ecclayout);

concat->num_subdev = num_devs;
concat->mtd.name = name;
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index c32b127..244faa8 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -536,7 +536,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
part->name);
}

- slave->mtd.ecclayout = master->ecclayout;
+ mtd_set_ecclayout(&slave->mtd, master->ecclayout);
slave->mtd.ecc_step_size = master->ecc_step_size;
slave->mtd.ecc_strength = master->ecc_strength;
slave->mtd.bitflip_threshold = master->bitflip_threshold;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 30a0721..2b334cf 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4365,7 +4365,7 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->writebufsize = mtd->writesize;

/* propagate ecc info to mtd_info */
- mtd->ecclayout = ecc->layout;
+ mtd_set_ecclayout(mtd, ecc->layout);
mtd->ecc_strength = ecc->strength;
mtd->ecc_step_size = ecc->size;
/*
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 25e6bf2..b5937b7 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -4059,7 +4059,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
mtd_oobfree(mtd, i++, &oobfree))
mtd->oobavail += oobfree.length;

- mtd->ecclayout = this->ecclayout;
+ mtd_set_ecclayout(mtd, this->ecclayout);
mtd->ecc_strength = 1;

/* Fill in remaining MTD driver data */
--
2.1.4


\
 
 \ /
  Last update: 2015-12-07 23:41    [W:0.114 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site