lkml.org 
[lkml]   [2015]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 18/23] mtd: nand: bch: switch to nand_ecclayout_pos
Date
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/nand_bch.c | 33 +++++++++++----------------------
1 file changed, 11 insertions(+), 22 deletions(-)

diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index 9cff544..2937b49 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -32,13 +32,11 @@
/**
* struct nand_bch_control - private NAND BCH control structure
* @bch: BCH control structure
- * @ecclayout: private ecc layout for this BCH configuration
* @errloc: error location array
* @eccmask: XOR ecc mask, allows erased pages to be decoded as valid
*/
struct nand_bch_control {
struct bch_control *bch;
- struct nand_ecclayout ecclayout;
unsigned int *errloc;
unsigned char *eccmask;
};
@@ -124,7 +122,6 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
unsigned int m, t, eccsteps, i;
- struct nand_ecclayout *layout = nand->ecc.layout;
struct nand_bch_control *nbc = NULL;
unsigned char *erased_page;
unsigned int eccsize = nand->ecc.size;
@@ -161,8 +158,17 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)

eccsteps = mtd->writesize/eccsize;

+ /*
+ * Rely on the default ecclayout to ooblayout wrapper provided by MTD
+ * core if ecc.layout is not NULL.
+ * FIXME: this should be removed when all callers have moved to the
+ * mtd_ooblayout_ops approach.
+ */
+ if (nand->ecc.layout)
+ mtd_set_ecclayout(mtd, nand->ecc.layout);
+
/* if no ecc placement scheme was provided, build one */
- if (!layout) {
+ if (!mtd->ooblayout) {

/* handle large page devices only */
if (mtd->oobsize < 64) {
@@ -171,24 +177,7 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
goto fail;
}

- layout = &nbc->ecclayout;
- layout->eccbytes = eccsteps*eccbytes;
-
- /* reserve 2 bytes for bad block marker */
- if (layout->eccbytes+2 > mtd->oobsize) {
- printk(KERN_WARNING "no suitable oob scheme available "
- "for oobsize %d eccbytes %u\n", mtd->oobsize,
- eccbytes);
- goto fail;
- }
- /* put ecc bytes at oob tail */
- for (i = 0; i < layout->eccbytes; i++)
- layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
-
- layout->oobfree[0].offset = 2;
- layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
-
- nand->ecc.layout = layout;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
}

/* sanity checks */
--
2.1.4


\
 
 \ /
  Last update: 2015-12-07 23:41    [W:0.219 / U:2.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site