lkml.org 
[lkml]   [2015]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 00/11] Improvements for SPI IMX driver for Freescale IMX51, IMX53 and IMX6
Date
A number of patches to impove or add the implementation
for the spi-imx driver related to Freescale IMX51, IMX53 and IMX6.
It would also possible some of patches can be applied for other
Freescale controllers using spi-imx driver but could not be tested
due to lack of hardware.

Changes since V4:
* Split [PATCH v4 01] into several smaller commits
* Change [PATCH v4 01] into workaround to disable DMA for transfer which len mod WML
not equal 0
* Rework some patches to isolate changes in one place

Anton Bondarenko (11):
spi: imx: terminate RX DMA transaction in case of TX DMA timeout
spi: imx: reorder HW operations enable order to avoid possible RX data
loss
spi: imx: replace multiple watermarks with single for RX, TX and RXT
spi: imx: add function to check for IMX51 family controller
spi: imx: Add support for loopback for ECSPI controllers
spi: imx: return error from dma channel request
spi: imx: defer spi initialization, if DMA engine is
spi: imx: allow only WML aligned transfers to use DMA
spi: imx: remove dead RX DMA tail handling code
spi: imx: replace fixed timeout with calculated
spi: imx: add support for all SPI word width for DMA

drivers/spi/spi-imx.c | 249 ++++++++++++++++++++++++++++++++++++--------------
1 file changed, 179 insertions(+), 70 deletions(-)

--
2.6.3



\
 
 \ /
  Last update: 2015-12-05 18:41    [W:0.226 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site