lkml.org 
[lkml]   [2015]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/4] thermal: rcar: enable to use thermal-zone on DT
From
On Fri, Dec 4, 2015 at 9:32 AM, Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>> +Example (with thermal-zone):
>> +
>> +thermal-zones {
>> + cpu_thermal: cpu-thermal {
>> + polling-delay-passive = <1000>;
>> + polling-delay = <5000>;
>> +
>> + thermal-sensors = <&thermal>;
>> +
>> + trips {
>> + cpu-crit {
>> + temperature = <1150000>;
>> + hysteresis = <0>;
>> + type = "critical";
>> + };
>> + };
>> + cooling-maps {
>> + };
>> + };
>> +};
>> +
>> +thermal: thermal@e61f0000 {
>> + compatible = "renesas,thermal-r8a7790",
>> + "renesas,rcar-thermal-gen2",
>> + "renesas,rcar-thermal";
>> + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
>> + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
>> + power-domains = <&cpg_clocks>;
>> + #thermal-sensor-cells = <0>;
>> +};
>
> How are the two nodes above linked?

Pleae ignore my comment, I found the "<&thermal>".

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds


\
 
 \ /
  Last update: 2015-12-04 10:01    [W:0.055 / U:1.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site