Messages in this thread Patch in this message | | | From | Masahiro Yamada <> | Subject | [PATCH 1/2] ARM: dts: uniphier: change IRQ number of UART3 of PH1-Pro4 SoC | Date | Thu, 3 Dec 2015 15:33:56 +0900 |
| |
The UART3 is assigned with IRQ 29 for old SoCs, IRQ 177 for new ones, and PH1-Pro4 is on the boundary.
PH1-sLD3: UART3 is unavailable PH1-LD4, PH1-sLD8: only IRQ 29 is supported PH1-Pro4: both IRQ 29 and 177 are supported PH1-Pro5, ProXstream2, PH1-LD6b: only IRQ 177 is supported
This SoC can choose either IRQ 29 or IRQ 177, but the former is shared with another hardware (low speed serial0). The latter is dedicated for this hardware and more recommended.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> ---
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index 254642f..bbf3727 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -151,7 +151,7 @@ reg = <0x54006b00 0x40>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - interrupts = <0 29 4>; + interrupts = <0 177 4>; clocks = <&uart_clk>; fifo-size = <64>; }; -- 1.9.1
| |