lkml.org 
[lkml]   [2015]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/6] regulator: lp872x: Add enable GPIO pin support
From
Date
Le mardi 29 décembre 2015 à 14:02 -0600, Rob Herring a écrit :
> On Wed, Dec 23, 2015 at 11:58:37AM +0100, Paul Kocialkowski wrote:
> > LP872x regulators are made active via the EN pin, which might be hooked to a
> > GPIO. This adds support for driving the GPIO high when the driver is in use.
> >
> > Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> > ---
> > .../devicetree/bindings/regulator/lp872x.txt | 1 +
> > drivers/regulator/lp872x.c | 33 ++++++++++++++++++++--
> > include/linux/regulator/lp872x.h | 2 ++
> > 3 files changed, 33 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt
> > index 7818318..0559c25 100644
> > --- a/Documentation/devicetree/bindings/regulator/lp872x.txt
> > +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt
> > @@ -28,6 +28,7 @@ Optional properties:
> > - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
> > - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
> > - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
> > + - ti,enable-gpio: GPIO specifier for EN pin control of LP872x devices.
>
> Should be "-gpios" instead of "-gpio".

Care to comment why? There is only one GPIO that can be used here, since
there is only one single EN pin. I thought this matched what is done
already with "ti,dvs-gpio".

Thanks!
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-12-29 22:41    [W:0.150 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site