lkml.org 
[lkml]   [2015]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] clk: tegra: Use definition for pll_u override bit
From
Date
On 12/21/2015 7:56 AM, Jon Hunter wrote:
> The definition, PLLU_BASE_OVERRIDE, for the pll_u OVERRIDE bit is defined
> but not used and when the OVERRIDE bit is cleared in tegra210_pll_init()
> the code directly uses the bit number. Therefore, use the definition,
> PLLU_BASE_OVERRIDE when clearing the OVERRIDE bit.
>
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
> drivers/clk/tegra/clk-tegra210.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index 791215747863..6f043c5e2394 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -2520,7 +2520,7 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
>
> /* PLLU_VCO */
> val = readl(clk_base + pll_u_vco_params.base_reg);
> - val &= ~BIT(24); /* disable PLLU_OVERRIDE */
> + val &= ~PLLU_BASE_OVERRIDE; /* disable PLLU_OVERRIDE */
> writel(val, clk_base + pll_u_vco_params.base_reg);
>
> clk = tegra_clk_register_pllre("pll_u_vco", "pll_ref", clk_base, pmc,
>

Acked-by: Rhyland Klein <rklein@nvidia.com>

--
nvpublic


\
 
 \ /
  Last update: 2015-12-21 18:01    [W:0.046 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site