lkml.org 
[lkml]   [2015]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND RFC/PATCH 6/8] media: platform: mtk-vcodec: Add Mediatek V4L2 Video Encoder Driver
From
Date
On Tue, 2015-12-01 at 15:42 +0000, Daniel Thompson wrote:
> On 01/12/15 10:42, tiffany lin wrote:
> >>>> > diff --git a/drivers/media/platform/mtk-vcodec/common/venc_drv_if.c
> >>>> b/drivers/media/platform/mtk-vcodec/common/venc_drv_if.c
> >>>> > new file mode 100644
> >>>> > index 0000000..9b3f025
> >>>> > --- /dev/null
> > [snip]
> >>>> > +int venc_if_create(void *ctx, unsigned int fourcc, unsigned long
> >>>> *handle)
> >>>> > +{
> >>>> > + struct venc_handle *h;
> >>>> > + char str[10];
> >>>> > +
> >>>> > + mtk_vcodec_fmt2str(fourcc, str);
> >>>> > +
> >>>> > + h = kzalloc(sizeof(*h), GFP_KERNEL);
> >>>> > + if (!h)
> >>>> > + return -ENOMEM;
> >>>> > +
> >>>> > + h->fourcc = fourcc;
> >>>> > + h->ctx = ctx;
> >>>> > + mtk_vcodec_debug(h, "fmt = %s handle = %p", str, h);
> >>>> > +
> >>>> > + switch (fourcc) {
> >>>> > + default:
> >>>> > + mtk_vcodec_err(h, "invalid format %s", str);
> >>>> > + goto err_out;
> >>>> > + }
> >>>> > +
> >>>> > + *handle = (unsigned long)h;
> >>>> > + return 0;
> >>>> > +
> >>>> > +err_out:
> >>>> > + kfree(h);
> >>>> > + return -EINVAL;
> >>>> > +}
> >>>> > +
> >>>> > +int venc_if_init(unsigned long handle)
> >>>> > +{
> >>>> > + int ret = 0;
> >>>> > + struct venc_handle *h = (struct venc_handle *)handle;
> >>>> > +
> >>>> > + mtk_vcodec_debug_enter(h);
> >>>> > +
> >>>> > + mtk_venc_lock(h->ctx);
> >>>> > + mtk_vcodec_enc_clock_on();
> >>>> > + vpu_enable_clock(vpu_get_plat_device(h->ctx->dev->plat_dev));
> >>>> > + ret = h->enc_if->init(h->ctx, (unsigned long *)&h->drv_handle);
> >>>> > + vpu_disable_clock(vpu_get_plat_device(h->ctx->dev->plat_dev));
> >>>> > + mtk_vcodec_enc_clock_off();
> >>>> > + mtk_venc_unlock(h->ctx);
> >>>> > +
> >>>> > + return ret;
> >>>> > +}
> >>>>
> >>>> To me this looks more like an obfuscation layer rather than a
> >>>> abstraction layer. I don't understand why we need to hide things from
> >>>> the V4L2 implementation that this code forms part of.
> >>>>
> >>>> More importantly, if this code was included somewhere where it could be
> >>>> properly integrated with the device model you might be able to use the
> >>>> pm_runtime system to avoid this sort of "heroics" to manage the clocks
> >>>> anyway.
> >>>>
> >>> We want to abstract common part from encoder driver.
> >>> Every encoder driver follow same calling flow and only need to take care
> >>> about how to communicate with vpu to encode specific format.
> >>> Encoder driver do not need to take care clock and multiple instance
> >>> issue.
> >>
> >> Looking at each of those stages:
> >>
> >> mtk_venc_lock():
> >> Why isn't one of the existing V4L2 locking strategies ok for you?
> >>
> > We only has one encoder hw.
> > To support multiple encode instances.
> > When one encoder ctx access encoder hw, it need to get lock first.
> >
> >> mtk_vcodec_enc_clock_on():
> >> This does seem like something a sub-driver *should* be doing for itself
> > This is for enabling encoder hw related clock.
> > To support multiple instances, one encode ctx must get hw lock first
> > then clock on/off hw relate clock.
> >
> >> vpu_enable_clock():
> >> Why can't the VPU driver manage this internally using pm_runtime?
> >>
> > Our VPU do not have power domain.
> > We will remove VPU clock on/off and let vpu control it in next version.
> >
> >>
> >> That is why I described this as an obfuscation layer. It is collecting
> >> a bunch of stuff that can be handled using the kernel driver model and
> >> clumping them together in a special middle layer.
> >>
> > We do use kernel driver model, but we put it in
> > mtk_vcodec_enc_clock_on/mtk_vcodec_enc_clock_off.
> > Every sub-driver has no need to write the same code.
> > And once clock configuration change or porting to other chips, we don't
> > need to change sub-driver one-by-one, just change abstract layer.
>
> I'm afraid I remain extremely unconvinced by the value of this API. It
> is possible that once the types are fixed and it is tidied up it won't
> stick out so much but I will be very surprised.
>
> Either way, I can wait until v2 before we discuss it further.
>
>
> >>>> If the start streaming operation implemented cleanup-on-error properly
> >>>> then there would only be two useful states: Started and stopped. Even
> >>>> the "sticky" error behavior looks unnecessary to me (meaning we don't
> >>>> need to track its state).
> >>>>
> >>> We cannot guaranteed that IOCTLs called from the user space follow
> >>> required sequence.
> >>> We need states to know if our driver could accept IOCTL command.
> >>
> >> I believe that knowing whether the streaming is started or stopped
> >> (e.g. two states) is sufficient for a driver to correctly handle
> >> abitrary ioctls from userspace and even then, the core code tracks
> >> this state for you so there's no need for you do it.
> >>
> >> The queue/dequeue ioctls succeed or fail based on the length of the
> >> queue (i.e. is the buffer queue overflowing or not) and have no need
> >> to check the streaming state.
> >
> >> If you are absolutely sure that the other states are needed then
> >> please provide an example of an ioctl() sequence where the additional
> >> state is needed.
> >>
> > I know your point that we have too many state changes in start_streaming
> > and stop_streaming function.
> > We will refine these two functions in next version.
> >
> > For the example, we need MTK_STATE_HEADER state, to make sure before
> > encode start, driver already get information to set encode parameters.
>
> Interesting. Again, I'll wait to see how the state simplifcation goes
> before commenting further.
>
>
> > We need MTK_STATE_ABORT to inform encoder thread (mtk_venc_worker) that
> > stop encodeing job from stopped ctx instance.
> > When user space qbuf, we need to make sure everything is ready to sent
> > buf to encode.
>
> Agree that you need a flag here. In fact currently you have two,
> MTK_STATE_ABORT and an unused one called aborting.
>
> You need to be very careful with these flags though. They are a magnet
> for data race bugs (especially combined with SMP).
>
> For example at present I can't see any locking in the worker code. This
> means there is nothing to make all those read-modify-write sequences
> that manage the state atomic (thus risking state corruption).
>
We prevent that one function set the flag and others clear the flag.
So there is no special lock to protect state.

>
> Daniel.




\
 
 \ /
  Last update: 2015-12-02 14:21    [W:0.120 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site