lkml.org 
[lkml]   [2015]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] clocksource: simplify ACPI code in arm_arch_timer.c
Date
From: Fu Wei <fu.wei@linaro.org>

The patch update arm_arch_timer driver to use the function
provided by the new GTDT driver of ACPI.
By this way, arm_arch_timer.c can be simplified, and separate
all the ACPI GTDT knowledge from this timer driver.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
drivers/clocksource/arm_arch_timer.c | 48 ++++++++----------------------------
1 file changed, 10 insertions(+), 38 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index e16fdad..87d6bae 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -806,60 +806,32 @@ static void __init arch_timer_mem_init(struct device_node *np)
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
arch_timer_mem_init);

-#ifdef CONFIG_ACPI
-static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
-{
- int trigger, polarity;
-
- if (!interrupt)
- return 0;
-
- trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
- : ACPI_LEVEL_SENSITIVE;
-
- polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
- : ACPI_ACTIVE_HIGH;
-
- return acpi_register_gsi(NULL, interrupt, trigger, polarity);
-}
-
+#ifdef CONFIG_ACPI_GTDT
/* Initialize per-processor generic timer */
static int __init arch_timer_acpi_init(struct acpi_table_header *table)
{
- struct acpi_table_gtdt *gtdt;
+ struct arch_timer_data data;

if (arch_timers_present & ARCH_CP15_TIMER) {
pr_warn("arch_timer: already initialized, skipping\n");
return -EINVAL;
}

- gtdt = container_of(table, struct acpi_table_gtdt, header);
-
arch_timers_present |= ARCH_CP15_TIMER;

- arch_timer_ppi[PHYS_SECURE_PPI] =
- map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
- gtdt->secure_el1_flags);
-
- arch_timer_ppi[PHYS_NONSECURE_PPI] =
- map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
- gtdt->non_secure_el1_flags);
-
- arch_timer_ppi[VIRT_PPI] =
- map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
- gtdt->virtual_timer_flags);
+ if (gtdt_arch_timer_data_init(table, &data))
+ return -EINVAL;

- arch_timer_ppi[HYP_PPI] =
- map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
- gtdt->non_secure_el2_flags);
+ arch_timer_ppi[PHYS_SECURE_PPI] = data.phys_secure_ppi;
+ arch_timer_ppi[PHYS_NONSECURE_PPI] = data.phys_nonsecure_ppi;
+ arch_timer_ppi[VIRT_PPI] = data.virt_ppi;
+ arch_timer_ppi[HYP_PPI] = data.hyp_ppi;
+ arch_timer_c3stop = data.c3stop; /* Always-on capability */

/* Get the frequency from CNTFRQ */
arch_timer_detect_rate(NULL, NULL);
-
- /* Always-on capability */
- arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
-
arch_timer_init();
+
return 0;
}
CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
--
2.5.0


\
 
 \ /
  Last update: 2015-12-02 07:21    [W:0.059 / U:23.660 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site