lkml.org 
[lkml]   [2015]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 2/3] arm64: dts: mt8173: Add thermal zone node.
From
Date
On Wed, 2015-12-16 at 16:34 +0800, Daniel Kurtz wrote:
> On Wed, Dec 16, 2015 at 11:59 AM, Dawei Chien <dawei.chien@mediatek.com> wrote:
> >
> > This adds thermal zone node to Mediatek MT8173 dtsi file.
> >
> > Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> > ---
> > This patch is base on patchset:
> > https://lkml.org/lkml/2015/11/30/239
> > ---
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 43 ++++++++++++++++++++++++++++++
> > 1 file changed, 43 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > index fda805d..4114cee 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> > @@ -188,6 +188,49 @@
> > clock-output-names = "cpum_ck";
> > };
> >
> > + thermal-zones {
> > + cpu_thermal: cpu_thermal {
> > + polling-delay-passive = <1000>; /* milliseconds */
> > + polling-delay = <1000>; /* milliseconds */
> > +
> > + thermal-sensors = <&thermal 0>;
>
> This should be <&thermal> with the MTK temp sensor node in
> https://lkml.org/lkml/2015/11/30/239 patch series.
>
> -Dan

Hi Dan,
Sascha's thermal driver V12 only register sensor id as 0, so we need to
register sensor id as 0 to device tree as well.

Either <&thermal 0> or <&thermal>, sensor id should be 0 for two cases.
I try this two case, function all work fine for two cases. May I have
any misunderstand? Please kindly give your comment.
I will re-send this patch again once you tell me the reason, thank you.

BR,
Dawei



\
 
 \ /
  Last update: 2015-12-16 11:41    [W:0.065 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site