lkml.org 
[lkml]   [2015]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 1/2] Documentation: bridge: Add documentation for ps8640 DT properties
Date
Add documentation for DT properties supported by
ps8640 DSI-eDP converter.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changes since v5
-no changes
---
.../devicetree/bindings/display/bridge/ps8640.txt | 43 ++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ps8640.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.txt b/Documentation/devicetree/bindings/display/bridge/ps8640.txt
new file mode 100644
index 0000000..a3e0971
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.txt
@@ -0,0 +1,43 @@
+ps8640-bridge bindings
+
+Required properties:
+ - compatible: "parade,ps8640"
+ - reg: first page address of the bridge.
+ - sleep-gpios: OF device-tree gpio specification for PD_ pin.
+ - reset-gpios: OF device-tree gpio specification for reset pin.
+ - mode-sel-gpios: OF device-tree gpio specification for mode-sel pin.
+ - vdd12-supply: OF device-tree regulator specification for 1.2V power.
+ - vdd33-supply: OF device-tree regulator specification for 3.3V power.
+ - ports: The device node can contain video interface port nodes per
+ the video-interfaces bind[1]. For port@0,set the reg = <0> as
+ ps8640 dsi in and port@1,set the reg = <1> as ps8640 eDP out.
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ edp-bridge@18 {
+ compatible = "parade,ps8640";
+ reg = <0x18>;
+ sleep-gpios = <&pio 116 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 115 GPIO_ACTIVE_HIGH>;
+ mode-sel-gpios = <&pio 92 GPIO_ACTIVE_HIGH>;
+ vdd12-supply = <&ps8640_fixed_1v2>;
+ vdd33-supply = <&mt6397_vgp2_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ ps8640_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ ps8640_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
--
1.7.9.5


\
 
 \ /
  Last update: 2015-12-15 04:41    [W:0.056 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site