lkml.org 
[lkml]   [2015]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH linux-next (v3) 1/2] reset: Add brcm,bcm6345-reset device tree binding
Date
Add device tree binding for the BCM6345 soft reset controller.

The BCM6345 contains a soft-reset controller activated by setting
a bit (that must previously have been cleared).

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
---
v3: Resend. Example has changed because usbh now has two compatible
strings and uses a power domain instead of a regulator.

v2: Renamed to bcm6345, removed "mask" property.
Acked-by: Rob Herring <robh@kernel.org>

.../bindings/reset/brcm,bcm6345-reset.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt

diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt
new file mode 100644
index 0000000..0313040
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt
@@ -0,0 +1,33 @@
+Broadcom BCM6345 reset controller
+
+The BCM6345 contains a basic soft reset controller in the perf register
+set which resets components using a bit in a register.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "brcm,bcm<soc>-reset", "brcm,bcm6345-reset"
+- regmap: The register map phandle
+- offset: Offset in the register map for the reset register (in bytes)
+- #reset-cells: Must be set to 1
+
+Example:
+
+periph_soft_rst: reset-controller {
+ compatible = "brcm,bcm63168-reset", "brcm,bcm6345-reset";
+ regmap = <&periph_cntl>;
+ offset = <0x10>;
+
+ #reset-cells = <1>;
+};
+
+usbh: usbphy@10002700 {
+ compatible = "brcm,bcm63168-usbh", "brcm,bcm6328-usbh";
+ reg = <0x10002700 0x38>;
+ clocks = <&periph_clk 13>, <&timer_clk 18>;
+ resets = <&periph_soft_rst 6>;
+ power-domains = <&misc_iddq_ctrl 4>;
+ #phy-cells = <0>;
+};
+
--
2.1.4
--
Simon Arlott


\
 
 \ /
  Last update: 2015-12-10 23:01    [W:0.378 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site