lkml.org 
[lkml]   [2015]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: LM90 driver and ti tmp461 detection
...
>On Thu, Dec 10, 2015 at 09:49:43AM -0800, Guenter Roeck wrote:
> >
> >I have a DT based board yes, but i have also planed to submit my changes
> >and also wanted to implement the autodetection of the chip.
> >
> >I have also planned (or need) to implement the "n-Factor Correction" for the
> >CPU diodes. There is a register to set this value in the tmp451 and tmp461.
> >Would that make sense to add a DT property for the driver to be able
> >to set this value? What do you think?
> >
>
> See max6697.c for some examples. Maybe we can use similar bindings.
>

Seems to be a good way. I think I will also add the extended mode selection
via DT.

> Guenter
>

Regards
Andy


\
 
 \ /
  Last update: 2015-12-10 19:41    [W:0.155 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site