lkml.org 
[lkml]   [2015]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 08/10] cpufreq: st: Provide runtime initialised driver for ST's platforms
On Thu, 10 Dec 2015, Viresh Kumar wrote:

> On 09-12-15, 15:58, Lee Jones wrote:
> > +/*
> > + * Only match on "suitable for ALL versions" entries
> > + *
> > + * This will be used with the BIT() macro. It sets the
> > + * top bit of a 32bit value and is equal to 0x80000000.
> > + */
> > +#define DEFAULT_VERSION 31
>
> Okay, I misread it in the earlier version. This looks fine.
>
> > +static int sti_cpufreq_set_opp_info(void)
> > +{
>
> > + sprintf(name, "pcode%d", pcode);
>
> I would use snprintf here, in case I haven't counted the string
> properly. That should guarantee that we don't access the anything else
> than the 'name' array.

Not sure it's a big problem, unless the PCODE is read incorrectly from
h/w, but okay.

> > + ret = dev_pm_opp_set_prop_name(dev, name);
> > + if (ret) {
> > + dev_err(dev, "Failed to set prop name\n");
> > + return ret;
> > + }
> > +
> > + version[0] = BIT(major);
> > + version[1] = BIT(minor);
> > + version[2] = BIT(substrate);
> > +
> > + ret = dev_pm_opp_set_supported_hw(dev, version, VERSION_ELEMENTS);
> > + if (ret) {
> > + dev_err(dev, "Failed to set supported hardware\n");
> > + return ret;
> > + }
> > +
> > + dev_err(dev, "pcode: %d major: %d minor: %d substrate: %d\n",
> > + pcode, major, minor, substrate);
> > + dev_err(dev, "version[0]: %x version[1]: %x version[2]: %x\n",
> > + version[0], version[1], version[2]);
>
> These aren't errors.. dev_info ?

This is left-over from testing. Will change.

> > + return 0;
> > +}
> > +
>
> > +static int sti_cpufreq_init(void)
> > +{
> > + int ret;
> > +
> > + ddata.cpu = get_cpu_device(0);
> > + if (!ddata.cpu) {
> > + dev_err(ddata.cpu, "Failed to get device for CPU0\n");
> > + goto skip_voltage_scaling;
> > + }
> > +
> > + if (!of_get_property(ddata.cpu->of_node, "operating-points-v2", NULL)) {
> > + dev_err(ddata.cpu, "OPP-v2 not supported\n");
>
> Should be:
> dev_dbg(ddata.cpu, "OPP-v2 not supported, skip voltage scaling\n");

It's at least a dev_warn(). I do want this to appear on the bootlog.

> > + goto skip_voltage_scaling;
> > + }
> > +
> > + ret = sti_cpufreq_fetch_syscon_regsiters();
> > + if (ret)
> > + goto skip_voltage_scaling;
> > +
> > + ret = sti_cpufreq_set_opp_info();
> > + if (ret)
>
> Shouldn't this be !ret ? You should have jumped on success here.

Good spot. Last minute change. Will fix.

> > + goto register_cpufreq_dt;
> > +
> > +skip_voltage_scaling:
> > + dev_err(ddata.cpu, "Not doing voltage scaling\n");
>
> This doesn't look nice as you are adding unnecessary jumps to just
> save on a print message. And because of the earlier suggestion you can
> do:

Actually it only adds one extra goto. The other three are required
regardless. And it saves on one whole print and prevents the other
two prints from becoming multi-line. I think a single goto is worth
skipping that amount of non-sense and it is the latter which is the
greater evil.

I've seen what both methods looks like and chose this one for a
reason.

> ret = sti_cpufreq_set_opp_info();
> if (ret)
> dev_err(ddata.cpu, "Skip voltage scaling\n");
>
> > +
> > +register_cpufreq_dt:
> > + platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
> > +
> > + return 0;
> > +}
> > +module_init(sti_cpufreq_init);
> > +
> > +MODULE_DESCRIPTION("STMicroelectronics CPUFreq/OPP driver");
> > +MODULE_AUTHOR("Ajitpal Singh <ajitpal.singh@st.com>");
> > +MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>");
> > +MODULE_LICENSE("GPL v2");

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-12-10 10:01    [W:0.061 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site