lkml.org 
[lkml]   [2015]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64: dts: add all hi6220 i2c nodes
hi Shawn

On 2015/12/2 10:05, Shawn Guo wrote:
> On Thu, Nov 26, 2015 at 03:57:03PM +0800, Xinwei Kong wrote:
>> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
>> use this I2C IP of Synopsys Designware for HiKey board.
>>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
>> 1 file changed, 37 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> index 82d2488..85d4a8b 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> @@ -208,5 +208,42 @@
>> clock-names = "uartclk", "apb_pclk";
>> status = "disabled";
>> };
>> +
>> + i2c0: i2c@f7100000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7100000 0x0 0x1000>;
>> + interrupts = <0 44 4>;
>> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
>> + clock-names = "clk_i2c0";
>
> Neither bindings doc i2c-designware.txt defines this property, nor
> kernel i2c-designware driver uses this property. So I think this
> clock-names property can just be dropped.
>
This property should been delete it. I will debug it in HiKey board then
send v3 patch.

Thank you
xinwei
> Otherwise, the patch looks good to me.
>
> Shawn
>
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@f7101000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7101000 0x0 0x1000>;
>> + interrupts = <0 45 4>;
>> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
>> + clock-names = "clk_i2c1";
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@f7102000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7102000 0x0 0x1000>;
>> + interrupts = <0 46 4>;
>> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
>> + clock-names = "clk_i2c2";
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> };
>> };
>> --
>> 1.9.1
>>
>>
>>
>
> .
>



\
 
 \ /
  Last update: 2015-12-02 04:01    [W:0.061 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site