lkml.org 
[lkml]   [2015]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64: dts: qcom: Add apq8096 dragonboard dts skeletons
On 12/01/2015 08:11 AM, Rajendra Nayak wrote:
> Add new dtsi and dts files for the apq8096 dragonboards with just
> a serial device used as debug console
>
> While at it, also rearrange the Makefile so we have one dtb per line
> so as to be consistent with whats done on other platforms.
>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 4 ++-
> arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts | 21 ++++++++++++++++
> arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
> 3 files changed, 54 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
> create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi

One problem. The board you have is not called a dragonboard. Let's
check with the marketing folks on what they're calling it now. We need
to explicitly avoid using dragonboard here as that name applies to a
different class of products. Thanks.

- Bryan


--
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
Linux Foundation Collaborative Project



\
 
 \ /
  Last update: 2015-12-01 22:41    [W:0.055 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site