lkml.org 
[lkml]   [2015]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [TESTPATCH v2] xhci: fix usb2 resume timing and races.
Date

Hi,

Mathias Nyman <mathias.nyman@linux.intel.com> writes:
> On 01.12.2015 16:32, Felipe Balbi wrote:
>>
>> Hi,
>>
>> Mathias Nyman <mathias.nyman@linux.intel.com> writes:
>>> usb2 ports need to signal resume for 20ms before moving to U0 state.
>>
>> at least 20ms ;-) Recently, we decided to drive resume for 40ms to
>> support devices with broken FW.
>>
>
> True, but specs talk about 20ms, and I'm just trying to give some context for what's
> going on. This testpatch doesn't touch the timings.
>
> Daniel is able to trigger a USB2 xhci resume issue which I hope is fixed with this patch.
> This is especially made for his setup running a 4.3 kernel
>
> If this works I'll clean up all the "20ms" in the commit message and comments.
>
> Just noticed that xhci USB2 host initiated resume uses a hardcoded msleep(20).
> That needs to be changed to USB_RESUME_TIMEOUT at some point.
> For now I'm just interested in knowing if this patch works.
>
>>
>> this 'v2' note doesn't have to go into commit log, IMO.
>>
>
> It's going to be cleaned out as well, just there to explain to Daniel, and the world why
> a second version of the testpatch was created.

all right, thanks ;-)

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-12-01 16:21    [W:0.038 / U:2.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site