lkml.org 
[lkml]   [2015]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Grafting old platform drivers onto a new DT kernel
Date
Mason <slash.tmp@free.fr> writes:

> On 09/11/2015 17:12, Måns Rullgård wrote:
>
>> Mason writes:
>>
>>> On 09/11/2015 16:40, Måns Rullgård wrote:
>>>
>>>> The simplest solution for you is probably to add a quick and dirty DT
>>>> binding to the old driver. If it doesn't use any driver-specific
>>>> platform data struct, you only need to set .of_match_table in the
>>>> struct platform_driver. If there is a platform data struct, you'll also
>>>> need to write some code to populate it from DT properties. It shouldn't
>>>> take more than a few minutes per driver in most cases.
>>>
>>> I'll try that approach, although I fear that "a few minutes per driver"
>>> is an optimistic assessment.
>>
>> If the driver only needs an MMIO region and an IRQ, it is literally five
>> lines of code.
>
> It took me 7 days to figure out there were 2 lines missing in the
> interrupt controller driver.
>
> My problem is that I don't understand the platform API, nor the
> interaction with the DT API.
>
> Let me see...
>
> In arch/arm/mach-tangox/platform_dev.c
>
> static struct platform_device tangox_sdhci0_device = { ... };
> static struct platform_device tangox_sdhci1_device = { ... };
>
> static void tangox_init_sdhci(void)
> {
> if (tangox_sdio_enabled(0))
> platform_device_register(&tangox_sdhci0_device);
>
> if (tangox_sdio_enabled(1))
> platform_device_register(&tangox_sdhci1_device);
> }
>
> called from tangox_init_devices() which is marked arch_initcall.

Delete all of that. The generic DT code will create the platform
devices based on the device tree.

> In the driver

Add something like this:

static const struct of_device_id tangox_sdio_dt_ids[] = {
{ .compatible = "sigma,tangox-sdio" },
{ }
};

> static struct platform_driver tangox_platform_sdio0 = {

.probe = sdhci_tangox_probe,

> .remove = sdhci_tangox_remove,
> .suspend = sdhci_tangox_suspend,
> .resume = sdhci_tangox_resume,
> .driver = {
> .name = "tangox-sdhci",
> .owner = THIS_MODULE,

.of_match_table = tangox_sdio_dt_ids,

> },
> };

And that should be it.

> static int __init tangox_sdhci_drv_init(void) {
> return platform_driver_probe(&tangox_platform_sdio0, sdhci_tangox_probe);
> }
>
> static void __exit tangox_sdhci_drv_exit(void) {
> platform_driver_unregister(&tangox_platform_sdio0);
> }
>
> module_init(tangox_sdhci_drv_init);
> module_exit(tangox_sdhci_drv_exit);

You can replace those functions and module_init()/module_exit() with
module_platform_driver() if you want.

> The old way:
>
> 1) call platform_device_register() with a "struct platform_device"
> 2) call platform_driver_probe with a "struct platform_driver"
>
> The new way(?)
>
> The mess in 2) is hidden behind module_platform_driver?

module_platform_driver() is just a macro that creates standard driver
register/unregister functions much like the ones above.

> The platform_device_register() is done by the DT core?

Correct.

> The struct platform_driver requires a probe function?

That's the usual way.

--
Måns Rullgård
mans@mansr.com


\
 
 \ /
  Last update: 2015-11-09 18:21    [W:0.057 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site