lkml.org 
[lkml]   [2015]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/5] Documentation: tps65912: Add DT bindings for the TPS65912 PMIC
On Fri, Oct 30, 2015 at 05:28:04PM -0500, Andrew F. Davis wrote:
> The TPS65912 PMIC contains several regulators and a GPIO controller.
> Add bindings for the TPS65912 PMIC.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
> .../devicetree/bindings/gpio/gpio-tps65912.txt | 16 +++++++
> Documentation/devicetree/bindings/mfd/tps65912.txt | 51 ++++++++++++++++++++++
> .../bindings/regulator/tps65912-regulator.txt | 28 ++++++++++++
> 3 files changed, 95 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt

Acked-by: Rob Herring <robh@kernel.org>

>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
> new file mode 100644
> index 0000000..ba8d633
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
> @@ -0,0 +1,16 @@
> +* TPS65912 GPIO Controller bindings
> +
> +Required properties:
> + - compatible : Should be "ti,tps65912-gpio".
> + - gpio-controller : Marks the device node as a GPIO Controller.
> + - #gpio-cells : Should be two. The first cell is the pin number and
> + the second cell is used to specify flags.
> + See ../gpio/gpio.txt for more information.
> +
> +Example:
> +
> + gpio4: gpio {
> + compatible = "ti,tps65912-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
> new file mode 100644
> index 0000000..65426b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
> @@ -0,0 +1,51 @@
> +* TPS65912 Power Management Integrated Circuit bindings
> +
> +Required properties:
> + - compatible : Should be "ti,tps65912".
> + - reg : Slave address or chip select number (I2C / SPI).
> + - interrupt-parent : The parent interrupt controller.
> + - interrupts : The interrupt line the device is connected to.
> + - interrupt-controller : Marks the device node as an interrupt controller.
> + - #interrupt-cells : The number of cells to describe an IRQ, this should be 2.
> + The first cell is the IRQ number.
> + The second cell is the flags, encoded as the trigger masks from
> + ../interrupt-controller/interrupts.txt.
> +
> +Additional nodes defined in:
> + - Regulators: ../regulator/tps65912-regulator.txt
> + - GPIO: ../gpio/gpio-tps65912.txt.
> +
> +Example:
> +
> + pmic: tps65912@2d {
> + compatible = "ti,tps65912";
> + reg = <0x2d>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + regulators {
> + compatible = "ti,tps65912-regulator";
> +
> + dcdc1 {
> + regulator-name = "vdd_core";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <1144000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1 {
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <1900000>;
> + regulator-max-microvolt = <1900000>;
> + };
> + };
> +
> + gpio4: gpio {
> + compatible = "ti,tps65912-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
> new file mode 100644
> index 0000000..b81973d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
> @@ -0,0 +1,28 @@
> +* TPS65912 regulator bindings
> +
> +Required properties:
> + - compatible : Should be "ti,tps65912-regulator".
> + - list of regulators provided by this controller, must be named
> + after their hardware counterparts: dcdc[1-4] and ldo[1-10].
> +
> +Each regulator is defined using the standard binding for regulators.
> +
> +Example:
> +
> + regulator {
> + compatible = "ti,tps65912-regulator";
> +
> + dcdc1 {
> + regulator-name = "vdd_core";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <1144000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1 {
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <1900000>;
> + regulator-max-microvolt = <1900000>;
> + };
> + };
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2015-11-06 22:01    [W:0.387 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site