lkml.org 
[lkml]   [2015]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RESEND 0/4] SMP support for Broadcom NSP
From
Date


On 11/5/2015 3:04 PM, Russell King - ARM Linux wrote:
> On Thu, Nov 05, 2015 at 12:51:17AM -0500, Kapil Hali wrote:
>> Hi,
>>
>> This series adds SMP support for Broadcom's Northstar Plus SoC.
>>
>> There are similar SMP enablement methods for many ARMv7 bsed SoCs.
>> BCM NSP SoC, has a typical such mechanism - after power-on, the
>> secondary core is held in a standby state, primary core provides a
>> startup address for the secondary core and wakes it up. Booting of
>> the secondary core is serialized using pen_release global variable.
>
> Why do you need the pen_release stuff? The above implies that you
> have only one secondary core, and you can control when it comes out
> of standby state.
>
We can initiate a wake-up of the secondary core. I tested the changes
without pen_release method and it works. However, as I understand, I
think there is no other way for the primary core to know if the
secondary core has come out of standby state other than pen_release
mechanism. When there is no other method available, will not
smp_boot_secondary() always return successful wake-up of the
secondary core?

> Please, don't assume that the pen_release stuff is any kind of recommended
> or standardised system. It isn't. It's a hack for ARMs evaluation
> platforms.
>
Got it. As pen_release is forbidden, I will change the SMP mechanism
to remove pen_release method in the new patch set.

Thanks,
Kapil



\
 
 \ /
  Last update: 2015-11-06 13:41    [W:0.131 / U:6.264 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site