lkml.org 
[lkml]   [2015]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] Add PWM clock support for bcm2835
Date
Hi,

This patchset add support for pwm clock. At boot, this clock does not have a
default parent nor a default rate set. Thus we should be able to change its
parent to get this clock working. The current clock implementation is using a
mux to select the parent, but these clocks need to add a password (0x5a) in
higher register bits when changing parent. So a generic mux cannot be used
here.

The first patch fix the clock parent selection, while the second one is actually
adding the pwm clock registration.

Remi Pommarel (2):
clk: bcm2835: Support for clock parent selection
clk: bcm2835: Add PWM clock support

arch/arm/boot/dts/bcm2835.dtsi | 8 ++
drivers/clk/bcm/clk-bcm2835.c | 144 ++++++++++++++++++++++++------------
include/dt-bindings/clock/bcm2835.h | 3 +-
3 files changed, 108 insertions(+), 47 deletions(-)

--
2.0.1



\
 
 \ /
  Last update: 2015-11-05 00:21    [W:0.072 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site