lkml.org 
[lkml]   [2015]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] TTY/Serial patches for 4.4-rc1
The following changes since commit 25cb62b76430a91cc6195f902e61c2cb84ade622:

Linux 4.3-rc5 (2015-10-11 11:09:45 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git/ tags/tty-4.4-rc1

for you to fetch changes up to e052c6d15c61cc4caff2f06cbca72b183da9f15e:

tty: Use unbound workqueue for all input workers (2015-10-17 21:32:21 -0700)

----------------------------------------------------------------
TTY/Serial driver patches for 4.4-rc1

Here is the big tty and serial driver update for 4.4-rc1.

Lots of serial driver updates and a few small tty core changes. Full
details in the shortlog.

All of these have been in linux-next for a while.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

----------------------------------------------------------------
Abhimanyu Kapur (1):
ARM64: TTY: hvc_dcc: Add support for ARM64 dcc

Aleksandar Mitev (1):
serial: sh-sci: Remove timer on shutdown of port

Alexandre Belloni (1):
tty/serial: at91: move ATMEL_MAX_UART

Andre Przywara (1):
serial: atmel: fix compiler warning on address cast

Andreas Werner (1):
tty: serial: men_z135_uart.c: use mcb memory region size instead of hardcoded one

Andrzej Hajda (1):
tty: serial: lpc32xx_hs: fix handling platform_get_irq result

Andy Shevchenko (1):
serial: 8250_dma: no need to sync RX buffer

Arnd Bergmann (1):
serial: fix mctrl helper functions

Axel Lin (1):
serial: mux: Convert to uart_console_device instead of open-coded

Christoph Hellwig (1):
mpsc: use dma_set_mask insted of dma_supported

Ezequiel Garcia (1):
serial: omap: remove warnings about unused functions

Fabio Estevam (1):
serial: 68328serial: Use NULL for pointers

Geert Uytterhoeven (35):
serial: sh-sci: Replace buggy big #ifdef by runtime logic
serial: sh-sci: Prevent compiler warnings on 64-bit
serial: sh-sci: Correct SCIF_ERROR_CLEAR for plain SCIF
serial: sh-sci: Use SCIF_DR instead of hardcoded literal 1
serial: sh-sci: Use SCSMR_CKS instead of hardcoded literal 3
serial: sh-sci: Drop path in reference to serial_core.c
serial: sh-sci: Improve readability of sampling rate configuration
serial: sh-sci: Make sci_irq_desc[] const
serial: sh-sci: Make sci_regmap[] const
serial: sh-sci: Remove useless memory allocation failure printks
serial: sh-sci: Remove bogus sci_handle_fifo_overrun() call on (H)SCIF
serial: sh-sci: Improve DMA error messages
serial: sh-sci: Improve comments for DMA timeout calculation
serial: sh-sci: Handle DMA init failures inside sci_request_dma()
serial: sh-sci: Use correct device for DMA mapping with IOMMU
serial: sh-sci: Use min_t()/max_t() instead of casts
serial: sh-sci: Switch to dma_map_single() for DMA transmission
serial: sh-sci: Fix TX buffer mapping leak
serial: sh-sci: Use DMA submission helpers instead of open-coding
serial: sh-sci: Switch to generic DMA residue handling
serial: sh-sci: Stop acknowledging DMA transmit completions
serial: sh-sci: Simplify sci_submit_rx() error handling
serial: sh-sci: Do not resubmit DMA descriptors
serial: sh-sci: Fix race condition between RX worker and cleanup
serial: sh-sci: Pass scatterlist to sci_dma_rx_push()
serial: sh-sci: Use tty_insert_flip_string() for DMA receive
serial: sh-sci: Use incrementing pointers instead of stack array
serial: sh-sci: Don't call sci_rx_interrupt() on error when using DMA
serial: sh-sci: Don't call sci_dma_rx_push() if no data has arrived
serial: sh-sci: Shuffle functions around
serial: sh-sci: Get rid of the workqueue to handle receive DMA requests
serial: sh-sci: Submit RX DMA from RX interrupt on (H)SCIF
serial: sh-sci: Stop calling sci_start_rx() from sci_request_dma()
serial: sh-sci: Add DT support to DMA setup
serial: pl011: Spelling s/clocks-names/clock-names/

Greg Kroah-Hartman (1):
Merge 4.3-rc5 into tty-next

Guillaume Gomez (1):
tty: remove unneeded return statement

Heikki Krogerus (15):
serial: 8250_dw: add separate pointer for the uart_port to dw8250_probe
serial: 8250_dw: adapt to unified device property interface
serial: 8250_dw: hook the DMA in one place
serial: 8250_dw: only setup the port from one place
serial: 8250_dw: add dw8250_quirks function
serial: 8250_dw: proper support for UARTs without busy functionality
serial: 8250_dw: rename and comment the fallback dma filter
serial: 8250_dw: cleanup dw8250_idma_filter
serial: 8250_dw: cleanup dw8250_setup_port
serial: 8250_dw: don't set UPF_BOOT_AUTOCONF flag
serial: 8250_pci: Intel MID UART support to its own driver
dmaengine: hsu: make the UART driver in control of selecting this driver
dmaengine: hsu: introduce stubs for the exported functions
dmaengine: hsu: remove platform data
serial: 8250_mid: add support for DMA engine handling from UART MMIO

Ivan T. Ivanov (4):
tty: serial: msm: Add msm prefix to all driver functions
tty: serial: msm: Add TX DMA support
tty: serial: msm: Add RX DMA support
tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation

James Hogan (2):
serial: 8250: Tolerate clock variance for max baud rate
ttyFDC: Fix build problems due to use of module_{init,exit}

Javier Martinez Canillas (1):
serial: sc16is7xx: Remove unnecessary MODULE_ALIAS()

Jiri Slaby (2):
serial: at91, fix rs485 properties
tty: synclink, fix indentation

Jon Hunter (4):
serial: tegra: Handle another RX race condition
serial: tegra: Remove unnecessary return statements
serial: tegra: Remove redundant code and check in tegra_uart_stop_rx()
serial: tegra: Add helper function for handling RX buffer

Kazuya Mizuguchi (1):
serial: sh-sci: Fix exclusion of work_fn_rx and sci_dma_rx_complete

Kuninori Morimoto (1):
serial: sh-sci: Add device tree support for r8a7795

Lucas Stach (8):
serial: imx: add earlycon support
serial: imx: make setup_ufcr more useful
serial: imx: set up aging timer interrupt as DMA trigger
serial: imx: always restart DMA if more data is available
serial: imx: configure proper DMA burst sizes
serial: imx: don't use idle condition detect for DMA transfers
serial: imx: re-enable DMA support without hardware flow control
serial: imx: also update RX stats in DMA path

Luis de Bethencourt (4):
tty: serial: apbuart: Fix module autoload for OF platform driver
tty: serial: of_serial: Fix module autoload for OF platform driver
tty: serial: sprd: Fix module autoload for OF platform driver
tty: serial: cpm_uart: Fix module autoload for OF platform driver

Maciej S. Szmigiero (1):
serial: don't register CIR serial ports

Mans Rullgard (1):
serial: 8250: simplify ralink/alchemy register remap selection

Martin Sperl (1):
serial: of-serial: compile correctly when 8250 driver is compiled as module

Matt Redfearn (3):
serial: 8250_ingenic: Enable hardware flow control
serial: 8250_ingenic: Enable FIFO for Ingenic UARTs
devicetree: Add JZ4760/JZ4775 to Ingenic SoC UART binding

Max Filippov (1):
serial_core: support native endianness

Muhammad Hamza Farooq (4):
serial: sh-sci: Redirect port interrupts to CPU _only_ when DMA stops
serial: sh-sci: Call dma_async_issue_pending when transaction completes
serial: sh-sci: Do not terminate DMA engine when race condition occurs
serial: sh-sci: Pause DMA engine and get DMA status again

Paul Gortmaker (6):
drivers/tty: make pty.c slightly more explicitly non-modular
drivers/tty: make sysrq.c slightly more explicitly non-modular
drivers/tty: make hvc_console.c explicitly non-modular
drivers/tty: make serial/mpsc.c driver explicitly non-modular
drivers/tty: make serial 8250_lpc18xx.c Kconfig a tristate
tty: disable unbind for old 74xx based serial/mpsc console port

Peter Hurley (15):
serial: 8250: Refactor serial console restore-from-suspend
serial: 8250_omap: Remove RTS clear
tty: Remove tty_wait_until_sent_from_close()
tty: Remove ASYNC_CLOSING checks in open()/hangup() methods
usb: gadget: gserial: Privatize close_wait
tty: Remove tty_port::close_wait
tty: r3964: Use tty->read_wait waitqueue
tty: r3964: Replace/remove bogus tty lock use
tty: Remove wait_event_interruptible_tty()
n_tty: Remove reader wakeups for TTY_BREAK/TTY_PARITY chars
tty: Combine SIGTTOU/SIGTTIN handling
tty: core: Use correct spinlock flavor in tiocspgrp()
tty: Prevent tty teardown during tty_write_message()
tty: Abstract tty buffer work
tty: Use unbound workqueue for all input workers

Pramod Gurav (2):
tty: serial: msm: Add mask value for UART_DM registers
tty: serial: msm: replaces (1 << x) with BIT(x) macro

Robert Baldyga (4):
serial: samsung: remove unused 'irq' parameter
serial: samsung: remove unneded 'ignore_char' label
serial: samsung: introduce s3c24xx_serial_rx_drain_fifo() function
serial: samsung: Fix UART status handling in DMA mode

Scott Wood (2):
serial: 8250: Add OF earlycon support
serial: Enable Freescale 16550 workaround on arm

Sean Nyekjaer (1):
sc16is7xx: null ptr check

Sebastian Andrzej Siewior (1):
serial: 8250_omap: check how many bytes were injected

Stefan Agner (1):
serial: fsl_lpuart: add earlycon support

Sudeep Holla (2):
MIPS: ttyFDC: replace IRQF_NO_SUSPEND with IRQF_COND_SUSPEND
tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND

Taichi Kageyama (1):
serial: 8250: Fix autoconfig_irq() to avoid race conditions

Tilman Schmidt (1):
Documentation: improve line discipline method descriptions

Timur Tabi (2):
hvc_dcc: don't ignore errors during initialization
serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty()

Tobias Klauser (1):
serial: altera_uart: Use of_property_read_u32 instead of open-coding it

Uwe Kleine-König (5):
serial: mpc52xx: add delay after resetting transmitter to fix broken chars
serial: atmel: allow compile testing on non-atmel architectures
serial: mxs-auart+imx: allow compile testing on non-Freescale architectures
serial: mctrl-gpio: rename init function
serial: mctrl_gpio: implement interrupt handling

Yoshihiro Shimoda (3):
serial: sh-sci: Return IRQ_HANDLED when overrun if detected
serial: sh-sci: Fix NULL pointer dereference if HIGHMEM is enabled
serial: sh-sci: Don't kick tx in sci_er_interrupt() when using DMA

.../devicetree/bindings/serial/ingenic,uart.txt | 3 +-
Documentation/devicetree/bindings/serial/pl011.txt | 2 +-
.../devicetree/bindings/serial/qcom,msm-uartdm.txt | 6 +
.../bindings/serial/renesas,sci-serial.txt | 2 +
.../bindings/serial/snps-dw-apb-uart.txt | 3 +
Documentation/kernel-parameters.txt | 7 +
Documentation/serial/driver | 10 +-
Documentation/serial/tty.txt | 60 +-
arch/arm64/include/asm/dcc.h | 55 +
drivers/char/pcmcia/synclink_cs.c | 9 -
drivers/dma/hsu/Kconfig | 9 +-
drivers/dma/hsu/hsu.c | 24 +-
drivers/dma/hsu/hsu.h | 1 +
drivers/dma/hsu/pci.c | 2 +-
drivers/isdn/i4l/isdn_tty.c | 2 +-
drivers/tty/cyclades.c | 9 -
drivers/tty/hvc/Kconfig | 2 +-
drivers/tty/hvc/hvc_console.c | 20 +-
drivers/tty/hvc/hvc_dcc.c | 15 +-
drivers/tty/hvc/hvcs.c | 2 +-
drivers/tty/mips_ejtag_fdc.c | 39 +-
drivers/tty/n_r3964.c | 28 +-
drivers/tty/n_tty.c | 32 +-
drivers/tty/pty.c | 7 +-
drivers/tty/rocket.c | 13 -
drivers/tty/serial/68328serial.c | 5 +-
drivers/tty/serial/8250/8250_core.c | 26 +-
drivers/tty/serial/8250/8250_dma.c | 6 -
drivers/tty/serial/8250/8250_dw.c | 288 ++--
drivers/tty/serial/8250/8250_early.c | 4 +
drivers/tty/serial/8250/8250_ingenic.c | 88 +-
drivers/tty/serial/8250/8250_mid.c | 326 +++++
drivers/tty/serial/8250/8250_omap.c | 8 +-
drivers/tty/serial/8250/8250_pci.c | 229 +--
drivers/tty/serial/8250/8250_port.c | 86 +-
drivers/tty/serial/8250/Kconfig | 25 +-
drivers/tty/serial/8250/Makefile | 1 +
drivers/tty/serial/Kconfig | 12 +-
drivers/tty/serial/altera_uart.c | 26 +-
drivers/tty/serial/amba-pl011.c | 4 +-
drivers/tty/serial/apbuart.c | 1 +
drivers/tty/serial/atmel_serial.c | 27 +-
drivers/tty/serial/clps711x.c | 2 +-
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 1 +
drivers/tty/serial/crisv10.c | 34 +-
drivers/tty/serial/fsl_lpuart.c | 39 +
drivers/tty/serial/imx.c | 175 ++-
drivers/tty/serial/lpc32xx_hs.c | 7 +-
drivers/tty/serial/men_z135_uart.c | 23 +-
drivers/tty/serial/mpc52xx_uart.c | 7 +
drivers/tty/serial/mpsc.c | 41 +-
drivers/tty/serial/msm_serial.c | 622 ++++++++-
drivers/tty/serial/msm_serial.h | 53 +-
drivers/tty/serial/mux.c | 9 +-
drivers/tty/serial/mxs-auart.c | 2 +-
drivers/tty/serial/of_serial.c | 10 +
drivers/tty/serial/omap-serial.c | 2 +
drivers/tty/serial/samsung.c | 66 +-
drivers/tty/serial/sc16is7xx.c | 7 +-
drivers/tty/serial/serial-tegra.c | 94 +-
drivers/tty/serial/serial_core.c | 9 +-
drivers/tty/serial/serial_mctrl_gpio.c | 133 +-
drivers/tty/serial/serial_mctrl_gpio.h | 40 +-
drivers/tty/serial/sh-sci.c | 1460 ++++++++++----------
drivers/tty/serial/sh-sci.h | 49 +-
drivers/tty/serial/sprd_serial.c | 1 +
drivers/tty/serial/st-asc.c | 2 +-
drivers/tty/serial/stm32-usart.c | 3 +-
drivers/tty/synclink.c | 20 +-
drivers/tty/synclink_gt.c | 14 +-
drivers/tty/synclinkmp.c | 14 +-
drivers/tty/sysrq.c | 6 +-
drivers/tty/tty_buffer.c | 12 +-
drivers/tty/tty_io.c | 59 +-
drivers/tty/tty_ldisc.c | 2 +-
drivers/tty/tty_port.c | 28 +-
drivers/usb/gadget/function/u_serial.c | 6 +-
include/linux/dma/hsu.h | 11 +-
include/linux/n_r3964.h | 8 +-
include/linux/platform_data/atmel.h | 6 -
include/linux/platform_data/dma-hsu.h | 4 -
include/linux/tty.h | 48 +-
net/irda/ircomm/ircomm_tty.c | 31 +-
83 files changed, 2736 insertions(+), 1948 deletions(-)
create mode 100644 arch/arm64/include/asm/dcc.h
create mode 100644 drivers/tty/serial/8250/8250_mid.c


\
 
 \ /
  Last update: 2015-11-04 23:41    [W:0.078 / U:8.964 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site